Request For Quotation Purchase Of Electrical Goods

Led Lamp, Base Type E27, Power 15 W. 1. Light Source Type: Light-Emitting Diode (Led), Semiconductor. 2. Base Type E27 (Standard Screw). 3. Power Consumption: Not Less Than 15 W And Not More Than 18 W (Or Strictly: 15 W). 4. Operating Voltage Variable (Ac), In The Range Of At Least 170–240 V, Frequency 50/60 Hz5. Luminous Flux Not Less Than 1200 Lm. 6. Flask Shape Pear-Shaped (Type A60 / A65) Or Spherical. 7. Bulb Glass Type Matte / Opal (To Reduce Glare). 8. Color Temperature: Cold Light: In The Range Of 5000K - 6500K. 9. Color Rendering Index (Ra) No Less Than 80. 10. Light Beam Angle No Less Than 220°. 11. Ripple Rate Less Than 5% (No Visible Flicker). 12. Lamp Life Rated Average Life Of At Least 25,000 Hours. 13. Operating Temperature Range Stable Operation At Temperatures From -20 °C To +40 °C. 14. Certification And Standards: The Product Must Comply With The Requirements Of Current Technical Regulations. Each Lamp Must Be Supplied In Individual Original Packaging Containing Markings Indicating The Main Technical Characteristics, Brand Name And Country Of Manufacture., Two-Key Switch For External (Open) Installation. 1 Device Type: Household Switch, Two-Position. 2 Number Of Keys 2 (Two-Key). 3 Mounting / Installation Method: External (Surface / For Open Wiring / Surface Mounting). 4 Rated Current: Not Less Than 10 A. 5 Rated Voltage: Alternating (Ac), In The Range Of Not Less Than 220–250 V, Frequency 50 Hz. 6 Degree Of Protection Against Dust And Moisture: At Least Ip44 (Splash-Proof Design, Suitable For Wet Rooms). 7 Case And Key Material: Impact-Resistant Thermoplastic (Abs Plastic Or Polycarbonate), Resistant To Combustion And Ultraviolet Radiation. 8 Case Color: White / Gray (Or As Agreed With The Customer). 9 Material Of Conductive Contacts: Copper / Brass / Electrical Alloy. 10 Cable Entry: Availability Of Elastic Glands (Seals) For Hermetically Sealed Cable/Wire Entry. 11 Type Of Cable Clamps: Screw Or Screwless (Self-Clamping). 12 Standards And Safety: Compliance With Gost Iec 60669-1-2021 (Or Gost 30850.1-2002), Availability Of A Valid Certificate Of Conformity. Additional Delivery Conditions: The Product Must Be New, Not Used, Without Cracks, Chips Or Mechanical Damage. Each Product Must Be Supplied In Individual Packaging., Starter For Double-Ended Fluorescent Lamps With A Power Of 36 W. Purpose: Ensuring Reliable And Fast Ignition Of Linear Double-Ended Fluorescent Lamps (Type T8) With A Power Of 36 W (The Range Of Supported Lamp Power Is From 4 W To 22 W). Designed For Serial (Two-Lamp) Connection Of Two Lamps With A Power Of 36 W To One Electromagnetic Ballast (Emg/Choke) In An Alternating Current Network Of 220–240 V (Frequency 50 Hz), Or For A Single Connection In A Network Of 110–130 V. Housing Made Of Fire-Resistant, Impact-Resistant And Self-Extinguishing Plastic (Polycarbonate). Housing Shape With Recesses Or A Relief Top For Easy Dismantling Without The Use Of Tools. The Presence Of A Built-In Noise-Suppressing Capacitor To Minimize Radio Interference When Starting The Lamp. Contact Group: 2-Pin Design (Two Rigid Metal Legs) For Reliable Fixation In The Starter Holder. Number Of Ignition Cycles (Service Life): At Least 10,000 Starts., Self-Tapping Screws (Self-Tapping Screws) In Assortment. Purpose: For Durable Connection Of Building Materials, Fastening Electrical Installation Products (Cable Ducts, Clips, Boxes), Wooden Elements And Structures To Various Bases. Head Type: Countersunk (Ensures Flush Mounting, Which Is Critical, For Example, Inside Cable Ducts, So That The Head Does Not Damage The Cable). Slot Type: Phillips, Profile Ph2 (The Most Common Size, Which Fits Dielectric Screwdrivers From A Previously Approved Set). Thread Type: Coarse Pitch. Coating: Heat-Treated Steel (Hardened). The Coating Is Galvanized (White Or Yellow Zinc) Or Phosphated (Black), Providing Reliable Protection Against Corrosion. Tip Type: Sharp. Packaging: In Factory-Made Cardboard Or Plastic Boxes, Packed In 100 Pieces. 7 Cm (4.2×70 Mm Or 4.5×70 Mm), Tool Bag (Electrician/Installer Bag). Purpose: For Orderly Storage, Transportation And Quick Access To Hand-Held And Diagnostic Electrical Installation Tools When Carrying Out Repair Work At Sites. Design And Shape: A Rectangular Bag With A Rigid (Reinforced) Frame That Prevents Deformation Under The Weight Of Tools. Wide Opening Main Compartment For Quick Access To Contents. Material: High-Strength, Wear-Resistant And Moisture-Proof Synthetic Material - Polyester (Density Of At Least 600D Or 1680D). The Material Must Be Resistant To Tearing, Abrasion And Easy To Clean Dry And Wet. Elements Of Space Organization: Total Number Of Pockets And Compartments: At Least 15–20 Pieces (Including Internal And External Pockets). Availability Of Specialized Holders/Loops For Screwdrivers, Pliers And An Insulated Knife. The Presence Of An External Carabiner Or Strap For Attaching Electrical Tape. Bag Bottom: Rigid, Reinforced Plastic (Impact-Resistant Polypropylene) Or Molded Rubber Bottom. Carrying Method: Length-Adjustable Shoulder Strap With Soft, Thick Padding To Reduce Shoulder Strain. Durable Handle For Easy Carrying With A Soft Grip. Overall Dimensions: Length In The Range Of 350–450 Mm, Width 200–250 Mm, Height 250–320 Mm (Optimal Average Size For A Complete Electrician Set)., Dowel-Nail For Quick Installation. Purpose: For Fastening Utility Networks, Cable Ducts, Trays, Lighting Equipment And Self-Supporting Structures To Solid Foundations (Concrete, Solid Brick). Installation Type: Quick Installation (Hammered). Dowel Diameter (Nominal): 6 Mm. Dowel Length: 6×40 Mm - 6×60 Mm). Dowel Material: Polypropylene (Or Wear-Resistant Nylon/Polyamide). The Plastic Should Be Elastic And Not Chip Or Crack When Driving A Nail. Nail Material: Steel, Galvanized (To Prevent Corrosion And Rust Stains On Walls In Wet Medical Rooms). Type Of Side (Cuff): Hidden. Nail Design: Has A Screw Thread, Allowing, If Necessary, To Dismantle The Fastener Or Tighten It Using A Screwdriver/Screwdriver. Packaging / Packaging: 100 Pcs Per Pack., Double-Ended Fluorescent Lamp (Base Type G13, Power 36 W), Plastic Cable Channel (Mounting Box) For Electrical Wiring. Purpose: For Closed Installation, Mechanical Protection And Insulation Of Electrical And Low-Current Cables On The Surfaces Of Walls And Ceilings In The Premises Of A Medical Organization. Construction Type: U-Shaped Profile With A Blind Base And A Removable Snap-On Lid. The Presence Of A Double Lock On The Lid (Ensures Tight Closure, Prevents Spontaneous Opening And Facilitates Repeated Installation/Disassembly When Adding Cables). Profile Size (Section): 25×16 Mm (Acceptable Range: Width From 20 To 25 Mm, Height From 10 To 16 Mm). Material: Polyvinyl Chloride (Pvc), Non-Flammable (Self-Extinguishing, Highly Fire Resistant). Sanitary And Hygienic Properties: The Surface Must Be Smooth, Matte Or Glossy, Resistant To Ultraviolet Radiation (Not Yellowing) And Suitable For Regular Wet Cleaning And Disinfection. Colour: White (Ral 9003 Or Equivalent). Length Of One Piece (Whip): Standard - 2 Meters (2000 Mm). Installation And Operating Temperature: In The Range From -15 °C To +60 °C., Single Plug External (Surface) Socket. Rated Current: 16 A. Rated Voltage: 220–250 V. Number Of Seats: 1. Housing Protection Degree: At Least Ip44, Grounding Available. Material: Housing Made Of Non-Flammable Abs Plastic Or Polycarbonate; The Internal Base (Caliper) Can Be Thermoplastic Or Ceramic., Set Of Dielectric Screwdrivers (Insulated) For Electrical Installation Work. Purpose: For Installation And Dismantling Of Threaded Connections Under Voltage Up To 1000 V Ac In Distribution Boards And Electrical Equipment Of A Medical Organization. General Technical Requirements: Number Of Items In The Set: At Least 6 Items., Zero Bus In An Insulator / Cross-Module (Distribution Block) On A Din Rail. Purpose: For Switching Zero Working And Protective Conductors In Power And Lighting Distribution Boards Of Medical Premises. Conductor Material (Block): High-Quality Electrical Brass (Provides High Conductivity And Oxidation Resistance). Rated Current: Not Less Than 100 A - 125 A. Rated Operating Voltage: Up To 400 V Ac. Mounting Type: On A Standard 35 Mm Din Rail. Number Of Connected Groups (Holes): 10-14 Groups). Insulator/Case Material: Self-Extinguishing Plastic (Polyamide, Nylon), Flame Retardant And Heat Resistant. Allowed In A Closed Case (Cross-Module) With A Transparent Cover To Protect Against Accidental Contact. Diameter Of Cable Holes: Combined, For The Possibility Of Connecting Conductors With A Cross-Section From 1.5 Mm² To 10–16 Mm². Clamp Type: Screw. The Screws Must Ensure Reliable Fixation Of The Cable Cores Without Damaging The Wire., A Round Wall Lamp (Plafond) Is A Surface-Mounted Lighting Device Of A Hemispherical Or Flat Shape For Installation On Vertical Surfaces. Shape And Design: Round (Ball, Tablet, Hemisphere). Installation Type: Surface-Mounted (Wall-Ceiling). Power: From 6 To 60 W (Depending On The Type Of Light Source - Led Or For A Replaceable Lamp). Base / Light Source: Built-In Light-Emitting Diodes (Led) Or E27 / E14 Socket For A Regular Lamp. Supply Voltage: 220–240 V (50 Hz). Lamp Material: Matte Plastic (Polycarbonate), Glass Or Acrylic. Base Material: Metal, Plastic Or Aluminum. Color Temperature (For Led): 3000K (Warm), 4000K (Neutral), 6500K (Cool White). Protection Degree Ip54. Dimensions (Medium): Diameter 150–300 Mm, Height/Extension From The Wall 60–100 Mm, Rubberized/Polyvinyl Chloride Insulating Tape (Pvc Insulating Tape). Purpose: For Electrical Insulation Of Wires, Cables And Buses, Phase Marking, As Well As Protection Of Joints From Mechanical Damage And Moisture In Electrical Installations Of A Medical Organization. Material: Polyvinyl Chloride (Pvc) With A One-Sided Adhesive Layer On A Rubber Or Acrylic Base. Material Properties: Non-Flammable (Self-Extinguishing), Resistant To Uv Rays, Oils, Acids, Alkalis And Moisture. The Surface Is Smooth, Without Cracks, Folds Or Tears In The Adhesive Layer. Tape Width: In The Range From 15 To 19 Mm. Tape Length In One Roll: At Least 20 Meters. Thickness: At Least 0.13 Mm (Up To 0.18 Mm Is Allowed). Electrical Strength (Breakdown Voltage): At Least 5–6 Kv (Guarantees Safety When Used In 220/380 V Networks). Elongation At Break: At Least 150–200% (High Elasticity For Tight Winding). Operating Temperature Range: Operation -10 °C To +50 °C, Single-Key Switch For External (Open) Installation. 1 Device Type: Household Switch, Two-Position. 2 Number Of Keys1 (Single-Key). 3 Mounting / Installation Method: External (Surface / For Open Wiring / Surface Mounting). 4 Rated Current: Not Less Than 10 A. 5 Rated Voltage: Alternating (Ac), In The Range Of Not Less Than 220–250 V, Frequency 50 Hz. 6 Degree Of Protection Against Dust And Moisture: At Least Ip44 (Splash-Proof Design, Suitable For Wet Rooms). 7 Case And Key Material: Impact-Resistant Thermoplastic (Abs Plastic Or Polycarbonate), Resistant To Combustion And Ultraviolet Radiation. 8 Case Color: White / Gray (Or As Agreed With The Customer). 9 Material Of Conductive Contacts: Copper / Brass / Electrical Alloy. 10 Cable Entry: Availability Of Elastic Glands (Seals) For Hermetically Sealed Cable/Wire Entry. 11 Type Of Cable Clamps: Screw Or Screwless (Self-Clamping). 12 Standards And Safety: Compliance With Gost Iec 60669-1-2021 (Or Gost 30850.1-2002), Availability Of A Valid Certificate Of Conformity. Additional Delivery Conditions: The Product Must Be New, Not Used, Without Cracks, Chips Or Mechanical Damage. Each Product Must Be Supplied In Individual Packaging., Copper Three-Core Cable, Brand Vvg-Png-Ls, Voltage Not More Than 1,000 V, With A Cross-Section Of 2.5 Mm², Copper Two-Core Cable, Brand Vvg-Png-Ls, Voltage Not More Than 1,000 V, With A Cross-Section Of 2.5 Mm², Double External (Surface) Plug Socket. Rated Current: 16 A. Rated Voltage: 220–250 V. Number Of Seats: 2. Housing Protection Degree: At Least Ip44. Availability Of Grounding. Material: Housing Made Of Non-Flammable Abs Plastic Or Polycarbonate; The Internal Base (Caliper) Can Be Thermoplastic Or Ceramic., Single-Pole Automatic Switch C32. Rated Current: 32 A. Load Capacity: Up To 7.0 Kw. Purpose: To Ensure Fire And Electrical Safety, Protection Against Overloads And Short Circuits Of Group And Distribution Networks Of Medical Premises Of Group 0 And Group 1 (In Accordance With St Rk Gost R 50571.28-2009). Protection Of Main Lines, Distribution Group Panels (As The Input Device Of A Small Panel), Power Supply Of Forced Ventilation And Air Conditioning Systems. General Technical Requirements: Type Of Execution: Modular, For Installation In A Distribution Board. Number Of Poles: 1 (Single Pole, 1P). Rated Operating Voltage: 230 / 400 V Ac. Current Frequency: 50 Hz. Time-Current Characteristic: Type C (Operation Of The Electromagnetic Release In The Range From 5 To 10 Rated Currents). Rated Ultimate Breaking Capacity: Not Less Than 6000 A (6 Ka) (The Use Of 4.5 Ka Household Circuit Breakers In Medical Institutions Is Not Allowed). Housing Material: Flame Retardant Plastic (Polyamide Or Equivalent), Resistant To Abnormal Heat And Fire. Installation Method: On A Standard 35 Mm Din Rail (Width Of 1 Module - No More Than 18 Mm). Device Protection Degree: No Worse Than Ip20. Operating Temperature Range: -25 °C To +40 °C. Electrical Durability: At Least 10,000 Cycles (On/Off)., Self-Tapping Screws (Self-Tapping Screws) In Assortment. Purpose: For Durable Connection Of Building Materials, Fastening Electrical Installation Products (Cable Ducts, Clips, Boxes), Wooden Elements And Structures To Various Bases. Head Type: Countersunk (Ensures Flush Mounting, Which Is Critical, For Example, Inside Cable Ducts, So That The Head Does Not Damage The Cable). Slot Type: Phillips, Profile Ph2 (The Most Common Size, Which Fits Dielectric Screwdrivers From A Previously Approved Set). Thread Type: Coarse Pitch. Coating: Heat-Treated Steel (Hardened). The Coating Is Galvanized (White Or Yellow Zinc) Or Phosphated (Black), Providing Reliable Protection Against Corrosion. Tip Type: Sharp. Packaging: In Factory-Made Cardboard Or Plastic Boxes, Packed In 100 Pieces. 3 Cm (3.5×30 Mm Or 3.5×32 Mm):, Single-Pole Automatic Switch C25. Rated Current: 25 A. Load Capacity: Up To 5.5 Kw. Purpose: To Ensure Fire And Electrical Safety, Protection Against Overloads And Short Circuits Of Group And Distribution Networks Of Medical Premises Of Group 0 And Group 1 (In Accordance With St Rk Gost R 50571.28-2009). Power Supply For Medical And Auxiliary Electrical Equipment, Treatment Rooms And Laboratories (Autoclaves, Sterilizers, Centrifuges, Drying Cabinets, Powerful Climate Systems). General Technical Requirements: Type Of Execution: Modular, For Installation In A Distribution Board. Number Of Poles: 1 (Single Pole, 1P). Rated Operating Voltage: 230 / 400 V Ac. Current Frequency: 50 Hz. Time-Current Characteristic: Type C (Operation Of The Electromagnetic Release In The Range From 5 To 10 Rated Currents). Rated Ultimate Breaking Capacity: Not Less Than 6000 A (6 Ka) (The Use Of 4.5 Ka Household Circuit Breakers In Medical Institutions Is Not Allowed). Housing Material: Flame Retardant Plastic (Polyamide Or Equivalent), Resistant To Abnormal Heat And Fire. Installation Method: On A Standard 35 Mm Din Rail (Width Of 1 Module - No More Than 18 Mm). Device Protection Degree: No Worse Than Ip20. Operating Temperature Range: -25 °C To +40 °C. Electrical Durability: At Least 10,000 Cycles (On/Off).