Request For Quotation Products For Ahch

Industrial Oil I-40A. For Hydraulic Systems, Gears, Slide Guides And Other Industrial Equipment Components Where A Medium Viscosity Oil Is Required. Compliance With Standards: Gost 20799-88 (Or International Equivalent Iso Vg 68, Quality Class Iso L-An). The Oil Is New, Never Used (Not Regenerated, Not Reconstituted). Technical Characteristics: Kinematic Viscosity At 40°C - 61–75 Mm²/S, Acid Number - No More Than 0.05 Mg Koh/G, Ash Content - No More Than 0.005%, Content Of Mechanical Impurities And Water - None, Flash Point In An Open Crucible - No Lower Than 220°C, Pour Point - No Higher Than Minus 15°C. Container And Packaging: Factory Sealed Packaging (Canisters/Barrels) With Intact Manufacturer Seals. Documentation: Quality Passport (Certificate Of Analysis) From The Manufacturer For Each Batch Is Required. Year Of Release: No Earlier Than 2026., Soldering Acid. For Soldering Parts And Wires Made Of Carbon Steel, Stainless Steel, Copper And Its Alloys, Nickel. Ingredients: Orthophosphoric Acid (H₃po₄), Water. Flux Type: Active (Acid). Temperature Range Of Activity: 150–300°C. Appearance: Colorless Or Slightly Yellowish Viscous Liquid Without A Pungent Odor. Bottle Volume 30 Ml. Gost 10678-76, 1,2-Dichloroethane Technical (Ethylene Dichloride). Solvent Used For Dissolving Plastics (Abs, Pla, Hips), As Well As In The Production Of Vinyl Chloride, Ethylenediamine And Pharmaceuticals. Compliance With Standards: Gost 1942-86 “1,2-Dichloroethane Technical. Technical Conditions. Chemical Formula: C₂h₄cl₂, Relative Molecular Weight - 98.96. Appearance: Colorless Transparent Liquid With A Characteristic Odor. Flash Point - 9°C, Auto-Ignition Temperature - 413°C. Hazard Class: 3 (Flammable Liquid), Subclass 3.2. Bottle Volume: 0.5 L., Tin-Lead Eutectic Solder (Sn63/Pb37). High-Quality Eutectic Solder Intended For Precision Work In Electronics, Repair Of Printed Circuit Boards And Installation Of Smd Components. Provides Excellent Fluidity, Rapid Hardening And Reliable Connection Of Parts. Composition: Tin (Sn) - 63%, Lead (Pb) - 37%. Wire Diameter: 1.0 Mm. Weight: 250 G. Release Form: Coil With Flux. Flux Type: Built-In Rosin Core (Rosin Core) For Soldering Without Additional Flux. Melting Point: 183°C (Melts Instantly, Reducing The Risk Of Component Overheating). Standard: Gost 21931-76, Nshvi Set (Insulated Pin Sleeve Lug). Set Contents:1) Nshvi 0.5–8. Cuff Color Is White. Section 0.5 (Mm²). Quantity 200 Pcs.2) Nshvi 0.75–8. Cuff Color Is Grey. Section 0.75 (Mm²). Quantity 200 Pcs.3) Nshvi 1.0-8. Cuff Color Is Red. Section 1.0 (Mm²). Quantity 200 Pcs.4) Nshvi 1.5–8. Cuff Color Is Black. Section 1.5 (Mm²). Quantity 250 Pcs.5) Nshvi 2.5–8. Cuff Color Is Blue. Section 2.5 (Mm²). Quantity 250 Pcs.6) Nshvi 4.0-9. Cuff Color Is Grey. Section 4.0 (Mm²). Quantity 50 Pcs.7) Nshvi 6.0–12. Cuff Color Is Yellow. Section 6.0 (Mm²). Quantity 25 Pcs.8) Nshvi 10-12. Cuff Color Is Red. Section 10.0 (Mm²). Quantity 25 Pcs. Gost 12.2.007.0-75