Tenders Are Invited For Cranes, Mobile Lifting Frames And Works Trucks Fitted With A Crane – Gst-Terminal - Planning, Delivery And Commissioning Of Heavy-Duty Cranes

Cranes, Mobile Lifting Frames And Works Trucks Fitted With A Crane – Gst-Terminal - Planning, Delivery And Commissioning Of Heavy-Duty Cranes. E.1 Crane Track The Contractor Will Build The Crane Track Suitable For The Crane System Offered. As Part Of The Documentation, Documents Relating To The Measurement Of The Crane Track Must Also Be Provided. E.2 Crane Type Suitable Crane Systems Are Approved, For Example: • Rail-Bound Gantry - Heavy-Duty Crane • Comparable Crane System That Has Been Proven To Be Suitable For Use In Inland Ports Through At Least 3 References (Commissioning Not Older Than 3 Years) For The Handling Of Large-Volume And Heavy Goods. The Clearance Height Of The Gantry Crane From The Top Edge Of The Quay To The Bottom Edge Of The Gantry Girder Is 6.50 Meters, Linear Over The Entire 19 Meter Track Width Of The Gantry. The Crane Must Offer At Least The Following Load Capacities: Maximum Nominal Load Capacity 130 T Maximum Nominal Load Capacity Up To 20 M Radius From The Center Of Rotation 130 T Load Capacity At Maximum Radius 40 T Dynamic Loads Must Be Taken Into Account In Accordance With Applicable Standards And Operating Profile Overload Protection Is Mandatory Waterside Radius From The Center Of Rotation Of The Crane 52 M Landside Radius From The Center Of Rotation Of The Crane 52 M Lifting Height Above The Top Edge Of The Quay 30 M Lowering Depth Below Upper Edge Of The Quay 12 M Rotation Range 360° Or Technically Justified Equivalent Solution Working Area - Complete Coverage Of The Intended Berths And The Transshipment Areas And Storage Areas (Terminal) - Transshipment On The North Kai N5 To N6 (Bayernhof Company) Unloading Of Wheat, Agricultural Products Using Motor Grippers To The Mobile Hopper Via The Existing Conveyor Belt System To The Warehouse, In The Event Of Failure Of The North Kai Crane System. - Transshipment To The South Quay Between S9 To S10 To The Southern Storage Area Bl (2500 Sqm) If The Storage Area On The Heavy Load Peninsula Is Overloaded By Approx. 3500 Sqm. The Crane Is To Be Designed For Economical Port Transshipment. The Bidder Must Indicate The Expected Handling Capacity For Typical Load Cases, In Particular For: • General Cargo And Project Loads Up To 50 T • Heavy Goods From 50 T Up To The Maximum Load Capacity Of The Crane • Bulk Goods Using A Motor Grab (8 M³ Motor Grab With A Bulk Density Of 2.5 T/M³)