Request For Quotation Toilet Mounting Kit 6X70 Mm Starfix, Pvc Sewer Outlet Dn50 (87°), Type: Flexible Connection (Hose) For Connecting The Mixer To The Water Supply System;Length: 80 Cm;

Toilet Mounting Kit 6X70 Mm Starfix, Pvc Sewer Outlet Dn50 (87°), Type: Flexible Connection (Hose) For Connecting The Mixer To The Water Supply System;Length: 80 Cm;Purpose: Supply Of Cold And Hot Water To The Mixer In Domestic Sanitary Facilities;Design: Flexible Reinforced Hose With Inner Tube And Outer Braid;Inner Tube Material: Epdm Rubber Or Non-Toxic Food Grade Rubber, Hot Water Resistant;Outer Braid: Stainless Steel (Aisi 304) Or High-Strength Nylon Braid;Connection Type: Nut-Fitting;Connection Diameter:Nut: 1/2 (Standard Water Connection);Fitting: 1/2 Or M10/M8 (Depending On The Mixer Model);Fitting Material: Brass (Cw617n Or Equivalent) With Nickel-Plated, Corrosion-Resistant;Nut Type: Union (Hexagonal Or Round), With Internal Thread;Connection Type: Threaded Or With A Pressed Tip For The Mixer;Working Pressure: Up To 10 Bar (1.0 Mpa);Test Pressure: Up To 15–20 Bar;Operating Water Temperature: From +1°C To +90°C (Short-Term Up To +110°C);Throughput: Corresponds To Standard Domestic Water Supply (Without Pressure Limitation);Tightness: Ensured By Rubber Sealing Gaskets On The Connections;Sealing Elements: Epdm/Silicone Gaskets, Resistant To Wear And Temperature Changes;Stability:To Water Hammer;To Corrosion;To Lime Deposits;To Household Chemicals;Service Life: At Least 5 Years Under Normal Operating Conditions;Installation: Threaded Connection Without Welding;Compatibility:With Standard Mixers For Household Use;With Cold And Hot Water Supply Systems;Quality Control: Mandatory Factory Testing For Leaks And Pressure;Equipment:Flexible Hose 80 Cm – 1 Pc.;Nut – 1 Pc.;Fitting – 1 Pc.;Sealing Gaskets – Kit (Or Pre-Installed);Product Requirements: New, Without Defects, Cracks, Kinks Or Damage To Threads;Warranty Period: At Least 12 Months., Brass Valve Dia. Outer: 32 Mm, Attachment Method: Internal Thread, Pvc Sewer Coupling 3.2 Mm Diameter 50, Brass Valve Dia. Outer: 15 Mm, Attachment Method: Internal Thread, Universal Water Meter Gerrida Cbk-15Gi With Check Valve Dn 15 Mm, Type: Flexible Connection (Hose) For Connecting The Mixer To The Water Supply System;Length: 80 Cm;Purpose: Supply Of Cold And Hot Water To The Mixer In Domestic Sanitary Facilities;Design: Flexible Reinforced Hose With Inner Tube And Outer Braid;Inner Tube Material: Epdm Rubber Or Non-Toxic Food Grade Rubber, Hot Water Resistant;Outer Braid: Stainless Steel (Aisi 304) Or High-Strength Nylon Braid;Connection Type: Nut-Fitting;Connection Diameter:Nut: 1/2 (Standard Water Connection);Fitting: 1/2 Or M10/M8 (Depending On The Mixer Model);Fitting Material: Brass (Cw617n Or Equivalent) With Nickel-Plated, Corrosion-Resistant;Nut Type: Union (Hexagonal Or Round), With Internal Thread;Connection Type: Threaded Or With A Pressed Tip For The Mixer;Working Pressure: Up To 10 Bar (1.0 Mpa);Test Pressure: Up To 15–20 Bar;Operating Water Temperature: From +1°C To +90°C (Short-Term Up To +110°C);Throughput: Corresponds To Standard Domestic Water Supply (Without Pressure Limitation);Tightness: Ensured By Rubber Sealing Gaskets On The Connections;Sealing Elements: Epdm/Silicone Gaskets, Resistant To Wear And Temperature Changes;Stability:To Water Hammer;To Corrosion;To Lime Deposits;To Household Chemicals;Service Life: At Least 5 Years Under Normal Operating Conditions;Installation: Threaded Connection Without Welding;Compatibility:With Standard Mixers For Household Use;With Cold And Hot Water Supply Systems;Quality Control: Mandatory Factory Testing For Leaks And Pressure;Equipment:Flexible Hose 80 Cm – 1 Pc.;Nut – 1 Pc.;Fitting – 1 Pc.;Sealing Gaskets – Kit (Or Pre-Installed);Product Requirements: New, Without Defects, Cracks, Kinks Or Damage To Threads;Warranty Period: At Least 12 Months., Brass Ball Valve Ld Pride Dn 15 M/P Butterfly (External/Internal Thread), Polypropylene Coupling (Ppr), For Connecting Polypropylene Pipes, Diameter Ø15 Mm, Working Pressure Pn20, Connection By Heat Welding., Ppr Pipe (Polypropylene) Ø15 Mm, Reinforced With Glass Fiber (Pn20 Type), Is A Three-Layer Pipe Designed For Domestic Hot Water Supply, Cold Water Supply And Heating Systems. Thanks To Glass Fiber Reinforcement, It Has A Low Coefficient Of Linear Expansion, Does Not Require Stripping Before Soldering, And Can Withstand Operating Pressures Up To 20 Bar And Temperatures Up To +70-90°C, Polypropylene Combined Tee Ø15 Mm × 1/2 H, With Threaded Connection, For Connecting Polypropylene Pipes To Threaded Connections., Fastening Clip For Pipe Ø D15 Mm, Pvc Sewer Tee (90°) 3.2 Mm Diameter 50, Fastening Clip For Pipe Ø D50 Mm, Mounting The Sink To The Wall2 Dowels; 2 Nuts; 2 Studs; 2 Eccentricsitem Length(Mm)100 Mmpacking Length13 Cm, Pvc Sewer Pipe 50 Mm, Set For Mounting A Boiler And Water Heater Number Of Items In The Package2product Materialalloy Steelequipmentmounting Kitcountry Of Originrussiapacking Length14 Cmpackage Height2 Cm, Product Name: Single Water Mixer Mono 21 Cm Championproduct Type: Monofaucet (Mixer For One Water).Purpose: Intended For Supplying And Regulating The Flow Of Cold Or Hot Water In Domestic And Public Sanitary Facilities.Control Type: Single Lever.Installation Type: Mortise, Installation On A Sink Or Sink Through One Mounting Hole.Body Material: Grade A Plumbing Brass Locking Mechanism Material: Ceramic Cartridge With A Diameter Of 35 Mm.Housing Coating: Chrome Plated, Resistant To Abrasion, Corrosion And Household Detergents.Color: Chrome.Total Length Of Mixer: 210 Mm (21 Cm).Spout Length: No Less Than 175 Mm.Mixer Height: Not Less Than 140 Mm.Height To Spout: Not Less Than 110 Mm.Spout Type: Swivel Or Fixed.Aerator: Provided, Ensures Uniform Water Flow And Reduces Water Consumption.Connection To The Water Supply System: Standard Threaded Connection.Connection Diameter: 1/2 Inch.Working Water Pressure: From 1 To 5 Bar.Maximum Operating Pressure: Up To 10 Bar.Minimum Water Pressure: No More Than 0.5 Bar.Maximum Water Temperature: Up To +90 °C.Minimum Water Temperature: Not Lower Than +5 °C.Tightness: All Connections Must Ensure That There Are No Leaks During Operation.Stability:To Corrosion;To Lime Deposits;To Pressure Changes;To The Effects Of Household Detergents.Equipment:Mixer (Monocane) - 1 Pc.;Mounting Kit - 1 Set;Rubber Sealing Gaskets - 1 Set;Aerator - 1 Pc.;Passport Or Installation And Operating Instructions - 1 Pc.Packing: Factory Individual Packaging.Quality Requirements:The Product Must Be New;Not Used;Without Mechanical Damage;Free From Casting And Coating Defects;Factory Made.Warranty Period: At Least 12 Months., Polypropylene Elbow (Ppr) Ø15 Mm, For Connecting Pipes Of Cold And Hot Water Supply And Heating Systems.