Tenders Are Invited For Purchase Of Equipment As Part Of The Implementation Of A Task Under The Civil Protection And Civil Defense Program Ensuring Continuity Of Electricity Supplies

1. Subject Of The Order: The Subject Of The Order Is The Supply Of A 200 Kw Power Generator For Backup Power Supply Of Water Intakes In Order To Secure The Continuity Of Drinking Water Supplies.2.Quantity: 1 Pc.3.The Subject Of The Order Must Meet The Following Minimum Technical Requirements: 1) Brand New, Unused, Complete Unit, From Serial And Ongoing Production, Year Of Production Not Earlier Than 2026; 2) The Unit Is Manufactured In Accordance With Applicable Norms And Standards: 2006/42/Ec Machinery Directive; 2014/30/Eu Electromagnetic Compatibility; 2014/35/Ue Electrical Equipment Intended For Use Within Specified Voltage Limits; Pn-En Iso 8528-13:2016-07 Or Equivalent; Pn-En Iso 3744:2011 Or Equivalent; Iso 8528-1:2005 Or Equivalent; 2000/14/Ec, 2005/88/Ec - Noise Directive; Minimum Execution Class G2;3) Enclosed Version Of The Generator: Required Rated Power Of The Generator - 250 Kva (200 Kw); Required Emergency Power Of The Generator Not Less Than - 275 Kva (220 Kw); Voltage - 400/230 V; Frequency - 50Hz; Ce Certificate; 4) The Device Manufacturer Should Have: Implemented The Iso 9001:2015 System Or Equivalent;  Implemented Aqap 2110:2016 System Or Equivalent;5) Sound-Absorbing Casing, Muted With A Special, Non-Flammable Soundproofing Foam, Painted In Ral 5015, With Four Necessary Access Doors On The Longer Sides;6) Exhaust Gas And Hot Air Outlet Through The Upper Surface Of The Casing;7) Strong Structure That Can Be Transported With A Forklift, Crane, Hds - On Belts, Forks Or Chains;8) The Frame Is Additionally Insulated From The Ground With Rubber Feet (Cones) Screwed To The Frame, With The Possibility Of Adjusting The Height (Leveling);9) External Emergency Stop Button;10) Terminals On The Control Board: - Nc Contact For Connecting The External Fire Stop Wiring; - For Connecting The Generators Own Needs Wiring; - For Connecting The System Control Wiring Szr;11) Highly Efficient Vibration Dampers Of The Engine And Generator;12) Dimensions Not Exceeding (Length X Width X Height) – 3800 X 1400 X 2300 [Mm];13) Fuel Tank Of At Least 400 L In The Generator Frame, Allowing For Continuous Operation Of The Generator: At 75% Load, At Least 14 H; At 100% Load At Least 9 H; 14) Capacitive Fuel Level Sensor With % Indication On The Controller; 15) 15% Fuel Level Alarm (Reserve); 16) Turning Off The Unit At 5% Fuel (Protection Against Air Contamination); 17) Tank Drain Plug And At Least One Independent Hole In The Tank, Closed With A Cap On Screws, Enabling The Installation And Connection Of An Additional Fuel Installation Or Moving The Fuel Filler To The Other Side Of The Tank; 18) Steel Exhaust Silencer -35Db(A) – Built Inside The Unit;19) Engine: Number And Arrangement Of Cylinders – 6 L; Power Min. 230 Kw; Engine Capacity Min. 9500 Cm3; Required Type Of Injection - Direct; Electronic Speed Control; Block Heating - Engine Heater Controlled By The Unit Controller; Combustion At 75% Load, No More Than - 45 L/H; Combustion At 100