Request For Quotation Purchase Of Construction Goods

Polyurethane Foam, All-Season, Household (With Adapter Tube) For A Gun, In Aerosol Packaging. Gost R 59599-2021., Rubber Hammer - Mallet. A Rubber Mallet Made Of Black Rubber, With A Wooden Handle And A Striker Weighing 910 G, Is Used For Laying Tiles And Laminate Flooring, Straightening Metal, And Assembling Furniture. A Professional Tool Absorbs Shock Well, Which Allows You To Effectively Solve The Tasks. Reliability - The Striker Is Attached To The Handle By Pulling, Which Prevents It From Breaking During Operation. Mechanical Strength - The Working Part Is Made Of Rubber With A Hardness Of 80 Units. According To Shore. Protection From Destruction - The Colorless Varnish Coating Prevents The Wooden Handle From Drying Out. Striker Material: Rubber. Handle Material: Wood. Striker Shape: Round. Striker Color: Black. Length No Less Than 360Mm. Striker Weight 910G. The Diameter Of The Striker Is At Least 75Mm. Gost 19645-74., Self-Tapping Screw With Press Washer. Fastener Type: Self-Tapping Screw. Purpose Of The Fastener: For Sheet Metal And Metal Profiles. Fastener Material: Alloy Steel. Finish: Matt Chrome. Fastener Head Shape: Mushroom-Shaped. Spline Type: Cross-Shaped. Tip Type: Drill. The Thread Diameter Of The Fastener Is At Least 4.2 Mm. The Length Of The Fastener Is At Least 13 Mm. Gost R 59571-2021., Electrodes For Welding, Diameter 3 Mm. Welding Electrodes 46.00, Diameter Not Less Than 3 Mm, Are Intended For Manual Electric Arc Welding Of Carbon And Low-Alloy Pearlitic Steels With A Yield Strength Of Up To 380 Mpa, As Well As Reinforcing Steels Of Classes A240 And A300. They Are Used In All Spatial Positions On Alternating And Direct Current. Main Characteristics: Purpose: Welding Carbon And Low-Alloy Pearlitic Steels, Reinforcing Steels Of Classes A240 And A300. Mechanical Properties Of The Seam: Tensile Strength 480 Mpa, Yield Strength 380 Mpa, Relative Elongation 22%, Relative Contraction 45%. Features: 46.00 Electrodes Allow Welding At Extremely Low Currents, Which Is Especially Important When Welding Thin Materials. They Are Effective For Working With Metal That Has Dirt, Rust Or Oxides. Welding With An Extended Arc Is Allowed, Which Ensures Stable Combustion And Minimal Spattering. Easy Initial And Re-Ignition Of The Arc Guarantees Convenience And Speed Of Work. If The Coating Is Wet, It Is Recommended To Calcinate It At A Temperature Of 80-90°C For 60 Minutes. Chemical Composition Of The Deposited Metal: Carbon (C): 0.05-0.12%. Manganese (Mn): 0.15-0.65%. Silicon (Si): 0.10-0.50%. Sulfur (S): ≤0.030%. Phosphorus (P): ≤0.030%. Impact Strength: At +20°C (Kcu): ≥110 J/Cm². At 0°C (Kcu): ≥59 J/Cm². Gost 10052-75., Black Self-Tapping Screw. Purpose According To The Material For Drywall, Wood. Tip Type: Sharp. Material: Steel. Head Type: Tapered Head. Parameters: 3.5X32 Mm. Gost 11652-80, Black Self-Tapping Screw. Purpose According To The Material For Drywall, Wood. Tip Type: Sharp. Material: Steel. Head Type: Tapered Head. Parameters: 3.5X16 Mm. Gost 11652-80, Whisk For A Construction Mixer. Nozzle For Stirring Mortars. The Universal Mixer Whisk Is Made Of Durable Metal. The Galvanized Coating Ensures Wear Resistance And Resistance To Corrosion Of The Nozzle. The Sds Plus Type Shank Is Suitable For Using The Mixer With A Drill Or Hammer Drill. Length Not Less Than 400Mm. Shank Type: Sds Plus., Handle For Plastic Windows. Purpose: For Balcony Doors, For Plastic Windows. Material: Plastic. Shape: Curved. Features: Removable.Color: White. A White Aluminum Window Handle Without A Key With A Semicircular Rosette Shape Has A Fixation Angle Of At Least 45° And A Pin Length Of At Least 35 Mm; The Aluminum Window Handle Is Designed For Installation On Pvc And Wood Windows., Primer Primer 10 Kg. St Rk 2620-2015. Primer Primer (Frost-Resistant). For Interior And Exterior Work. Deep Penetrating Primer. For Strengthening Porous And Highly Absorbent Substrates., Black Self-Tapping Screw. Purpose According To The Material For Drywall, Wood. Tip Type: Sharp. Material: Steel. Head Type: Tapered Head. Parameters: 3.5X25 Mm. Gost 11652-80, Plastic Corner Pvc 50*50. Color White. Surface: Matte. Length Not Less Than 2700 Mm. Width Not Less Than 50 Mm. Height Not Less Than 50 Mm.Thickness Not Less Than 5 Mm. Mounting Method: Glue., A Six-Roller Glass Cutter Is A Hand-Held Tool Designed For Precise Cutting Of Sheet Glass With A Thickness Of 2 To 6 Mm. Equipped With Cutting Rollers Made Of Vk-8 Hard Alloy, Which Ensures Stable Cutting And Increased Service Life. A Metal Head With Two Special Grooves Allows You To Make A Neat Cut Without Chipping, And A Wooden Handle Provides A Comfortable Grip When Working. Tool Type: Roller Glass Cutter. The Number Of Cutting Elements Is At Least 1 Pc. Cutting Element Material: Hard Alloy Vk-8. Handle Material: Wood. The Thickness Of The Processed Glass Is At Least 2–6 Mm. Tool Length Is At Least 130 Mm. Packaging Dimensions: Length No Less Than 170Mm. Width Not Less Than 45Mm. Height Not Less Than 13Mm. Six-Roller Design For Extended Life. Metal Head With Guide Grooves. Ergonomic Wooden Handle. Compact And Lightweight Tool For Hand Work. Gost 10111-85., Furniture Stapler (Staple Gun). The Adjustable Furniture Stapler With A Steel Body Is Compatible With Type 53 Staples Measuring 4-14 Mm And Is Used For Fastening Work With Sheet Materials Such As Plywood, Cardboard, Fibreboard, Chipboard, Hardboard, As Well As Film And Thermal Insulation Materials. The Screw Regulator Allows You To Smoothly Change The Impact Force, Which Is Convenient For Working With Long Staples And Hard Materials. The Tool Will Be Useful When Assembling And Upholstering Furniture, Laying Carpets, And Carrying Out Repair And Finishing Work. Equipped With A Mechanism For Adjusting The Impact Force. Reliability - The Case Is Made Of Durable Steel By Stamping And Is Resistant To Damage. Rust Protection - The Body Surface Is Chrome Plated. Comfort During Operation - The Tool Has An Ergonomic Handle That Provides A Secure Grip. Safety Of Storage And Transportation - A Clamping Bracket Holds The Handle In The Non-Working Position, Preventing Spontaneous Operation Of The Stapler. Ergonomic Handle Increases Comfort. 53 (A|3|11) For Fastening Woven Materials (Fabric, Upholstery, Canvas) And Materials That Do Not Carry High Loads To Surfaces Made Of Wood, Fiberboard, Plastic, Etc. Thin Wire Does Not Damage The Fibers Of Materials. Handle: Steel. Case Material: Steel. Impact Force Adjustment: Yes. Bracket Type: 53 (4 -14 Mm) 23Ga. Staple Type: Used With Two Types Of Staples (Rectangular Type 53 4-14 Mm, Cable Type 28 10-12 Mm), As Well As 10-14 Mm Nails (T-Shaped) And 14 Mm Pins. The Length In The Package Is Not Less Than 230Mm. The Width Of The Package Is At Least 167Mm. The Height Of The Package Is At Least 30Mm. St Rk 3187-2018