Request For Quotation Purchase Of Steel Pipes, Mixers

Seamless Steel Pipe Du89key Features:• Outer Diameter: 89 Mm.• Wall Thickness: 4 Mm• Steel Grade: St20• Pipe Length: 4 • Manufacturing Method: Hot Rolled • Range: Gost 8732-78 (Hot Rolled)• Hydraulic Pressure: Pipes Must Withstand Test Pressure In Accordance With Gost Requirements (Usually Up To 20 Mpa / 200 Bar, Or Calculated Using The Formula For A Specific Wall).• Documentation: Each Batch Must Be Accompanied By An Original Quality Certificate (Manufacturers Passport) Indicating The Chemical Composition And Mechanical Properties Of The Steel. Quality Requirements:• There Should Be No Cracks, Caps, Slabs Or Dulls On The Surface Of The Pipes.• Minor Traces Of Technological Cleaning Of Defects Are Allowed If They Do Not Take The Wall Thickness Beyond The Minimum Nominal Values.• The Ends Of The Pipes Must Be Cut At Right Angles And Deburred.Agree With The Customer! 12 Month Warranty, Seamless Steel Pipe Dn40. Technical Specification (Main Parameters): Conditional Bore (Dn / Dn) 40 Mm. Outer Diameter (\(D_{N}\)) 45 Mm (Basic For Seamless). Wall Thickness (S) 4.0. Standards (Gost) Range Of Hot-Rolledsteel Grade 40X (Structural). Pipe Length 4.0. Manufacturing Method: Seamless (Hot-Deformed). •Hydraulic Pressure: Pipes Must Withstand Test Pressure In Accordance With Gost Requirements (Usually Up To 20 Mpa / 200 Bar, Or Calculated Using The Formula For A Specific Wall). • Documentation: Each Batch Must Be Accompanied By An Original Quality Certificate (Manufacturers Passport) Indicating The Chemical Composition And Mechanical Properties Of The Steel.Quality Requirements: • There Should Be No Cracks, Filming, Slabs Or Dulls On The Surface Of The Pipes. • Minor Traces Of Technological Cleaning Of Defects Are Allowed If They Do Not Take The Wall Thickness Beyond The Minimum Nominal Values.• The Ends Of The Pipes Must Be Cut At Right Angles And Deburred. Agree With The Customer! 12 Month Warranty, Seamless Steel Pipe Du76. Main Characteristics And Assortment (Gost 8732-78, Gost 8734-75)• Outer Diameter: 76 Mm.• Wall Thickness: 4 Mm• Type Of Production: Hot Rolled• Steel Grade: St.20• Pipe Length 4 • Hydraulic Pressure: Pipes Must Withstand Test Pressure In Accordance With Gost Requirements (Usually Up To 20 Mpa / 200 Bar, Or Calculated Using The Formula For A Specific Wall).• Documentation: Each Batch Must Be Accompanied By An Original Quality Certificate (Manufacturers Passport) Indicating The Chemical Composition And Mechanical Properties Of The Steel.Quality Requirements: • There Should Be No Cracks, Caps, Slabs Or Dulls On The Surface Of The Pipes.• Minor Traces Of Technological Cleaning Of Defects Are Allowed If They Do Not Take The Wall Thickness Beyond The Minimum Nominal Values.• The Ends Of The Pipes Must Be Cut At Right Angles And Deburred.Agree With The Customer! 12 Month Warranty, Single Lever Basin Mixer. Height (Mm) 110. Length (Mm) 140. Width (Mm) 50. Equipment: Aerator. Ceramic Cartridge 40Mm, Flexible Eyeliner, Hairpin. Material Brass. Type Single Lever. Fastening Type: Stud. Design Characteristics: Spout Rotation - No Rotation. Spout Height, Mm 55. Spout Length, Mm 90. Shut-Off Valve Ceramic Cartridge. Swivel Spout No. Color Silver. Agree With The Customer! 12 Month Warranty