Tenders Are Invited For Delivery Of A Wheeled Excavator With A Loading Function As Part Of The Task: Purchase Of A Self-Propelled Backhoe Loader With Wheeled And Tracked Chassis

1. The Subject Of The Order Is: Purchase Of A Self-Propelled Backhoe Loader With Wheeled And Tracked Chassis 2. The Scope Of The Subject Of The Order Includes: The Subject Of The Order Is The Delivery Of A Used Wheeled Excavator With A Charging Function Under The Civil Protection And Civil Defense Program (Olioc) For The Years 2025 - 2026 The Offered Excavator Must Be Complete, Free From Construction, Material And Workmanship Defects. Subject The Order Should Comply With Applicable Standards, Applicable Legal Provisions, Standards And Technical Requirements, Have The Necessary Documentation And The Eu Declaration Of Conformity (Or An Equivalent Document Required By Law) And Should Be Equipped With All Legally Required Systems And Standard Factory Equipment Provided By The Manufacturer, Even If They Are Not Listed In The Description Of The Subject Of The Order. With The Terms Of The Order Specified In The Swz. A Device With Higher (Better) Technical Parameters Will Meet The Requirements Of The Ordering Party. A Wheeled Excavator With A Loading Function Should Meet The Following Technical Parameters: 1) Used Machine - Year Of Production Min. 20202) The Machine Must Be 100% Operational, Free From Hidden Defects, Leaks Of Operating Fluids And Must Not Show Any Signs Of Major Structural Repairs (E.G. Welding Of The Arm) 3) The Machine Must Have An Inspection History And Repairs Confirmed By An Authorized Service Center Of A Given Brand4) The Machine Must Be The Property Of The Supplier, Cannot Be Encumbered With Third-Party Rights Or A Registered Pledge, And Cannot Be The Subject Of Enforcement Proceedings5) Mileage Expressed In Operating Hours, Maximum 4000 Mth.6) Turbocharged Diesel Engine With Exhaust Emission Standard Of Min. T4f (Analogously Stage Iv), Four-Cylinder With A Power Of Not Less Than 93 Kw 7) Operating Weight Of The Machine Up To 18 Tons.8) Drive On Both Axles 4X49) Axles Manufactured By The Excavator Manufacturer, Front Axle Oscillation +/- 8.5˚, Front Axle, Twin Wheels 10) 3 Driving Speeds: Min. 3.1 Km/H; Min. 33.5 Km/H; Hydraulic: A) Minimum Two Multi-Piston Pumps With A Capacity Of Min. 2 X 123 L/Min And A Maximum Operating Pressure Of Min. 310 Barb) Gear Pump With A Flow Of Min. 19 L/Min And A Pressure Of Min. 40 Bar C) System Capacity: Min. Alternator: Min. 55 Ahc) Two Heavy-Duty/Reinforced Batteries) Min. 5000 Mme Starter) Working Element - Arm: A) Three-Section With Offset Right/Left) Boom Length Min. 5.0 Mc) Digging Depth Min. 12.6 Rpm) Bucket Closing Angle Min. 182˚G) Digging Force Min. 6100 Kgfh) Maximum Loading Height Min. 7100 Mm.15) Transport Dimensions: A) Width In The Range: 2400-2500 Mmb) Length In The Range: 7300-8000 Mm Meeting Safety Requirementsb) Equipped With Air Conditioning, Heated And Pneumatically Adjustable Operators Seat, Front Sun Visor,C) System Allowing Setting And Monitoring The Machines Operating Parameters With A Display In The Cabin,D) Four Machine Operating Modes Optimizing Engine And Hydraulics Se