Request For Quotation Medical Products For A Paid Department

Diagnostic Coronary Catheter. Presence Of An Atraumatic Radiopaque Distal Tip. Nylon Gives The Catheter Flexibility To Provide The Necessary Access To The Vessels. The Steel Braid Provides Stability And Controllability - As A Result, The Internal Lumen Remains Stable When Passing Anatomical Bends. 5F – 0.047; 6F – 0.057. The Internal Lumen Has The Same Value Throughout The Catheters From The Hub To The Distal Tip. Maximum Contrast Media Pressure Is 1200 (A) Psi For All Sizes. Volumetric Blood Flow Velocity –21.3 Ml/Sec For Diameter 5F; 35 Ml/Sec For Diameter 6F. Outer Diameter – 5F And 6F. Length 65, 80, 90, 100, 110, 125 Cm. Compatible With Conductor - No More Than 0.038. Dimensions According To The Customers Request (For A Paid Branch), Guiding Catheter With A Diameter Of 5F, 6F And A Length Of 55, 90, 100 Cm. Coronary Guiding Catheter. Catheter Material – Outer Layer – Nylon (Nylon), Middle Part – Reinforced Two-Layer Steel Braid, Inner Layer – Ptfe Coating (Polytetrafluoroethylene), Distal Tip Is Radiopaque (Length 2.5 Mm). Multi-Segment Design. Thermofusion Of Individual Segments (Soft Tip, Developing Part, Main Shaft), The Tip Is Soft, Flexible, Atraumatic. Hybrid Technology Braid Increases Internal Clearance And Provides Support During Manipulation. Reinforcement Of The Catheter Wall With A Steel Mesh Prevents The Device From Bending In Places Of Anatomical Bends. Constant Internal Clearance Along The Entire Length. Internal Lumen Of The Catheter: 6 F – 0.070, 5 F – 0.056. Dimensions: Length 55, 90, 95, 100 Cm. Dimensions According To The Customer’S Request (For Paid Department), Drug-Eluting Coronary Stent System. Coronary Balloon-Expandable Drug-Eluting Stent Biolimus Based On A Highly Lipophilic Cytostatic. Purpose: For Stenting Of Coronary Arteries. Basic Functional Requirements, Technical Characteristics: Possibility Of Choosing A Stent Diameter Of 2.25; 2.5; 2.75; 3.0; 3.5; 4.0 Mm. The 3.0Mm Diameter Can Be Inflated To 4.75Mm. Wide Range Of Stent Lengths: 9, 14, 19, 24, 29, 33, 36 Mm. Compatible With 0.014 Guidewire And 5 Fr Guide Catheter. The Drug Coating Biolimus With A Highly Lipophilic Cytostatic Agent Has A Lipophilicity 10 Times Higher Than That Of Sirolimus And Zotoralimus. Biodegradable Coating Containing A Medicinal Substance Based On Polylactic Acid. Coating Only On The Outer Surface Of The Stent. Complete Release Of The Drug Biolimus And Destruction Of The Polymer Coating Within 6-9 Months. Stent Material Based On Cobalt-Chromium Alloy In Accordance With Astm F562. The Design Of The Beams Is Corrugated Rings, The Design Of The Cells Is Hybrid - Straight Jumpers With Arched Connectors. Wall Thickness 84 Μm (Sv) (Ø2.25,2.50,2.75,3.00 Mm), 88 Μm (Mv) (Ø 3.50, 4.00 Mm). Cross Profile Of The Stent Is No More Than 0.045. Crossing Profile For A Stent With A Diameter Of 3 Mm Is No More Than 0.045. The Drug Content Is At Least 15.6 Μg/Mm Of Stent Length. The Entry Profile Of The Stent Into The Stenosis Is No More Than 0.016. The Calculated Burst Pressure Is 16 Atm For Stents With A Diameter Of 2.25-3.00 Mm; 14 Atm For Diameters 3.5-4.0 Mm. The Nominal Pressure Is Not Higher Than 8 Atm. The Rapid Exchange Stent Delivery System Has Two Radiopaque Marks. The Size Of The Marker Tapes Is 0.5 Mm (Distal), 0.9 Mm (Proximal). The Working Length Of The Shaft Is No More Than 142 Cm. The Length Of The Distal Shaft Is 27.5 Cm. Dimensions According To The Customer’S Request (For A Paid Department)., Rigid Balloon Catheter For Ptca. Rapid Exchange (Rx) Balloon Catheter, Non-Compliant, For Percutaneous Transluminal Coronary Angioplasty (Ptca). The Catheter Must Have An Integrated Shaft System, At The Distal End Of Which A Balloon Is Attached. The Shaft Must Have One Lumen For Inflating/Deflating The Balloon, And A Second Lumen For Advancing The Conductor. Design - Quick Replacement Catheter. The Effective Length Of The Catheter Is 142 Cm ± 3 Cm; The Design Of The Proximal Part Of The Shaft Is Hypotube; The Coating Of The Proximal Part Of The Shaft Is Ptfe; Outer Diameter Of The Proximal Part Of The Shaft - 2.1 F / 0.0274 / 0.70 Mm; Location Of Insertion Depth Marks - 90 Cm ± 2 Cm And 100 Cm ± 2 Cm; Outer Diameter Of The Distal Part Of The Shaft - 2.6 F / 0.034 / 0.86 Mm; Profile Of Entry Into Stenosis - 0.018 / 0.46 Mm; Profile Of Passage Of Stenosis - ≤ 0.051; Cylinder Material - Nylon 12; Degree Of Cylinder Compliance - Non-Compliant; Laying Of The Cylinder – Three-Lobe; Cone Of The Cylinder - 30 Degrees; X-Ray Contrast Markers - 2 Stamped Platinum-Iridium Strips; Length Of Marks - 1 Mm; Nominal Pressure - 14 Atm (1419 Kpa) For All Sizes; Design Burst Pressure - 20 Atm (2027 Kpa) For Cylinders With A Diameter Of 2.00-4.00 Mm, 18 Atm (1824 Kpa) For Cylinders With A Diameter Of 4.50 Mm; Guiding Catheter Compatibility - 5 F For All Sizes (Min. Internal Diameter 0.056’’ / 1.42 Mm); Guiding Catheter Compatibility - 5F For All Sizes; (Minimum Internal Diameter Of The Guiding Catheter Is 0.056’’ / 1.42 Mm); Compatibility With Coronary Guidewire - 0.014 / 0.36 Mm; Hydrophilic Coating - The Coating Covers The Catheter Shaft, With The Exception Of The Balloon And Tip (Up To 50 Cm To The Proximal Part From The Tip) (For A Paid Department), Coronary Steerable Guidewire For Acute Occlusions. Universal Coronary Guidewire For Acute Occlusions. Diameter: No More Than 0.014 (0.3556 Mm). Availability Of Lengths, Cm: 180-190 Cm. Core Material: Stainless Steel, Core Type: Manufacturing Technology “Composite Core”, Single-Component Steel And A Duplicate Parallel Twisted Microcore Made Of Steel Wires. Rotation Transmission Available 1:1. Reinforcement Required To Bend The Distal Part Of The Conductor 0.5. 0.7 G. Distal Radiopaque Spiral, Length: 3 Cm. Proximal Spiral Made Of Stainless Steel, Length: 15-25 Cm. Proximal Spiral Coating: Ptfe. The Presence Of A Duplicate (Internal) Braid Of The Core. Possibility Of Extension Up To: No Less Than 300 Cm. Options For Covering The Distal Part: Hydrophilic. Support Options: Standard And Additional Availability. Options For The Distal Tip: Straight And J. Possibility Of Use Multiple Times During One Operation - To Provide Access To Vessels With Different Anatomical Characteristics, To Pass Through Affected Areas, Including Subtotal Stenoses, As Well As To Deliver Instruments - Coronary Balloons And Stents. Shelf Life From The Date Of Production Is 24 Months. (For Paid Branch), Balloon Coronary Catheter Dimensions: Diameter (Mm) 1.5; 2.0; 2.5; 2.75; 3.0; 3.5; 4.0 Mm Length (Mm) 10; 15; 20; 25; 30 Mm. Balloon Coronary Catheter. 1.Product Name - Balloon Coronary Catheter For Predilation. 2. Basic Requirements For The Product: 2.1. Intended For Dilatation Of Coronary Arteries. 2.2. Basic Functional Requirements, Technical Characteristics. 2.2.1. Standard Sizes: Diameter (Mm) 1.5; 2.0; 2.5; 2.75; 3.0; 3.5; 4.0 Mm Length (Mm) 10; 15; 20; 25; 30 Mm. 2.2.2. Presence Of A Hydrophilic Coating Of The Distal Shaft. 2.2.3. Availability Of A Low Crossing Profile Of 0.035 For A Catheter With A Diameter Of 3.0 Mm. 2.2.4. Possibility Of Using A Guiding Catheter With An Internal Diameter Of 0.055/1.40 Mm. 2.2.5. The Diameter Of The Proximal Shaft Is No More Than 2.2 Fr, The Distal One Is No More Than 2.6 Fr. 2.2.6. The Presence Of A Working Length Of The Catheter Is 142 Cm. 2.2.7. Presence Of Platinum-Iridium Radiopaque Markers. 2.2.8. The Design Of The Balloon Is Two-Petal For A Diameter Of 1.5 Mm, Three-Petal For A Diameter Of 2.0-3.0 Mm, Four-Petal For A Diameter Of 3.5-4.0 Mm. 2.2.9. Presence Of A Nominal Pressure Of At Least 6 Atm, Burst Pressure Of At Least 14 Atm. 2.2.10. The Balloon Material Is Polyamide Elastomer. 2.2.11. The Design Of The Balloon Catheter Is A Rapid Exchange Delivery System. (For Paid Branch), The Compression Device Has A Special Screw Clamp, The Pressure Is Adjusted In The Radial Artery For Hemostasis Using A Specially Shaped Screw Piston, Without Affecting The Blood Flow In The Ulnar Artery. The Screw Is Transparent So That It Can Be Accurately Placed In The Catheterization Area And Possible Bleeding Can Be Properly Treated. Sterilization Method: Ethylene Oxide (For Paid Department), Transradial Sheath Kit. Introducer-Port For Carrying Out Diagnostic And Interventional Instruments Into The Vascular Bed Through Radial Access In A Set For Coronary Angiography. The Introducer Material Is Radiopaque Polyethylene Plastic, Silicone Lubricating Coating Of The Cannula, Vascular Dilator And Valve. Six-Leaf Hemostatic Valve. Characteristics: The Presence Of A Lateral Outlet For The Introduction Of A Contrast Agent And Other Medicinal Solutions. The Side Outlet Has A Three-Way Tap. The Presence Of A Special Fixation For The Dilator, Which Eliminates The Possibility Of Its Dislocation When Passing Through Soft Tissues. Color Coding Of Sizes. (A) Equipment: Introducer, Vascular Dilator, Mini-Guidewire With A Diameter Of 0.021 (Double-Sided, Length 70 Cm), Puncture Needle 21G. Dimensions: Diameters 4, 5, 6 And 7 F, Lengths - 11 Cm For All Diameters And 23 Cm For Diameters 4.5 And 6 F. Dimensions According To The Customers Request (For A Paid Department)