Request For Quotation Purchase Of A Pressure Gauge And Thermomanometer

Pressure Gauge Indicating Deformation (General Technical) For Gas. Measurement Of Excess Pressure Of Non-Aggressive, Non-Crystallizing Gaseous Media (Natural Gas, Liquefied Gas, Air, Etc.). Measuring Range 0 – 10 Bar (Corresponds To The Range 0 – 1.0 Mpa / 0 – 10 Kgf/Cm²). Accuracy Class No Worse Than 1.6 (2.5 Allowed). Case Diameter 63 Mm (Equivalent From 60 To 65 Mm Is Allowed Depending On The Manufacturers Standards). The Location Of The Fitting Is Radial (Connection From Below). The Connecting Thread Is External, Cylindrical Pipe G ¼ (Or Metric M12x1.5 With An Adapter For A Gas Tap). Materials Of Construction Housing: Steel With A Protective Coating (Or Impact-Resistant Plastic/Stainless Steel). Glass: Instrument/Acrylic. Mechanism And Fitting: Copper Alloy (Brass). Operating Temperature Environment: From -20 °C To +60 °C (For Internal Or Protected Components). The Degree Of Protection Is Not Lower Than Ip31. The Type Of Purchased Pressure Gauges Must Be Included In The Register Of The State System For Ensuring The Uniformity Of Measurements Of The Republic Of Kazakhstan (Certified In The Republic Of Kazakhstan). The Device Must Be Supplied With A Valid Certificate Of Initial Verification (Or A Mark In The Passport) With A Verification Stamp Recognized By The Authorized Body Of The Republic Of Kazakhstan (Jsc Natsek Or An Accredited Laboratory). The Delivery Must Be Accompanied By A Technical Passport. Operating Instructions In Kazakh And Russian Languages. The Warranty Period Of The Device Must Be At Least 12 Months From The Date Of Commissioning. The Pressure Gauge Is Supplied In Individual Original Packaging, Complete With A Technical Passport Of The Product. The Device Must Be Included In The Register Of The State Inspectorate Of The Republic Of Kazakhstan And Supplied With A Valid Stamp/Certificate Of Initial Verification Issued By An Accredited Laboratory Of The Republic Of Kazakhstan (Validation Period At The Time Of Delivery Must Be Valid). Be Complete). The Technical Passport And Operating Documentation Must Be Provided In Kazakh And Russian., Thermal Manometer Showing Radial General Technical. Simultaneous Measurement Of Excess Pressure And Temperature Of Liquid And Gaseous Media That Are Non-Aggressive To Copper Alloys In Heating And Hot Water Supply Systems. Pressure Measurement Range 0 To 4 Bar (Or 0 To 6 Bar Depending On The Project). Temperature Measurement Range From 0 To 120 °C. Accuracy Class No Worse Than 2.5 For Pressure, No Worse Than 2.0 For Temperature. The Diameter Of The Device Body Is 80 Mm (An Equivalent Of 63–80 Mm Is Allowed In Accordance With The Factory Standard). Connection Location Radial (Bottom Connection). Connection Size External Cylindrical Pipe Thread G ½ (1/2 Inch). The Device Must Be Supplied Complete With An Automatic Shut-Off (Shut-Off) Valve ½, Allowing For Dismantling And Replacing The Thermomanometer Without Draining The Coolant From The Heating System. Materials Of Construction Housing: Impact-Resistant Plastic Or Metal (Steel/Brass). Glass: Instrument/Acrylic. Sensing Element And Fitting: Brass/Copper Alloy. The Type Of Measuring Device (Thermomanometer) Must Be Officially Included In The State Register Of The System For Ensuring The Uniformity Of Measurements Of The Republic Of Kazakhstan. The Device Is Delivered To The Customer With A Valid Stamp/Certificate Of Initial Verification From An Accredited Verification Laboratory Of The Republic Of Kazakhstan. The Product Passport, Operating Instructions And Warranty Documentation Are Provided Strictly In Kazakh And Russian Languages. The Period Of Official Warranty Support From The Supplier Is At Least 12 Months From The Date Of Delivery.