Tenders Are Invited For Adaptation Of The Building Of The Social Welfare Home At Ul. Kurasia 7 In Tarnobrzeg To Existing Fire Safety Regulations.

Carrying Out Construction Works And Post-Construction Inventory By Adapting The Building Of The Social Welfare Home At Ul. Kurasia 7 In Tarnobrzeg To The Existing Fire Protection Regulations In The Scope Of: - Dismantling Supporting Structures For Boxes By Drilling Holes Or Unscrewing Them (Applies To Existing Smoke Detectors, Rops And Fire Protection Control Panel), - Piercing Holes In Walls Or Ceilings, - Laying Cable Ducts In Ready-Made Grooves On A Surface Other Than Concrete, Trays Or Surface-Mounted Masking Strips, Without The Need To Make Grooves In Walls, - Screwing Pvc Electrical Installation Strips Onto The Brick, - Embedding Plastic Expansion Plugs In The Substrate And Metal Dowels Shot Into Walls Or Ceilings, - Installing A Compact Alarm Control Panel - Fire Alarm Control Panel, - Installing Power Supplies (Up To 12V Dc), Up To 6.5W - Smoke Exhaust/Fire Door Control Panel, - Dismantling All Detectors And Installations Fire Protection, All Smoke Detectors Are Not Isotope Detectors, - Installation Of Addressable, Universal, Optical Scattered Smoke Detectors, - Installation Of Addressable Multi-Sensor Smoke And Heat Detectors, - Installation Of Addressable Heat Detectors, - Installation Of Manual Fire Alarms, - Installation Of Manual Smoke Exhaust Buttons - Installation Of Acoustic And Optical Alarms, - In Addition To The Basic Design And Bill Of Quantities, As-Built Documentation Must Be Prepared As Agreed With Fire Protection Expert And Signed By The Designers Of A Given Industry Along With A Certificate Of Correct Execution For All Works Performed, - Smoke Exhaust Flaps Should Be Installed In 3 Staircases And Appropriate Automatic Control Of Opening The Air Intake Doors Should Be Provided, In Accordance With The Attached Drawing With The Following Parameters: • Staircase Segment A: Active Area Of The Flap At Least 1.4 M2, Aeration Area Of At Least 2.6 M2 Through Doors Open At An Angle Of 90 Degrees• Middle Cage Segment C: Active Area Of The Damper Min. 1.2 M2, Aeration Area Min. 1.72 M2 Through The Door Open At An Angle Of 90 Degrees• Lower Cage Segment C: Active Area Of The Flap Min. 1.2 M2, Aeration Area Min. 2.23 M2 Through The Door Open At An Angle Of 90 Degreesthe Door Must Open Automatically, - Colliding Doors In The Fire Zone Must Be Eliminated Accordingly Staircase (Segment A), - The External Doors Should Be Replaced With Air Intake Doors With Parameters Consistent With The Technical Conditions For External Partitions Equipped With Appropriate Actuators, - Automatic Flap Control Connected To The New Fire Control Panel Should Be Installed And Its Retrofitting Should Be Planned, - The Transitions Between Fire Zones Should Be Secured, - A Fire Scenario Should Be Prepared, - The Buildings Fire Safety Manual Should Be Updated, - A Complete Application For Issuing A Building Permit And An Opinion From A Fire Protection Expert Should Be Prepared. Fire Protection. Note: 1. Within The Scope Of The Order, The Contractor Must Estimate Th