Request For Quotation Purchase Of 5 Lots Of Oils From Commodity Producers (Engine, Industrial, Transmission)

Synthetic Transmission Oil. Gost 23652-79. For Use In Drive Axle Gearboxes, Transfer Cases, Power Take-Offs And Other Components Requiring The Use Of Api Gl-5 Sae 75W90 Oils. Contains 4 Liters. Kinematic Viscosity At 100 °C, Mm2/ With Astm D 445—14.9. Dynamic Viscosity At -40 °C, Mpa*S-65,000. Flash Point In An Open Crucible, °C 229, Pour Point, °C -41, Density At 15 °C, Kg/M3 843., Industrial Oil I-40. Gost 17479.4-87, In Containers Of 20 Liters, Kinematic Viscosity At 40*, Mm2/S - 65.8., Pour Point Not Higher - 15*, Ash Content - 0.005, Flash Point In An Open Crucible Not Lower Than 236*. Acid Number - 0.01., Diesel Motor Oil 15W40. Gost 17479.1-2015, All-Season, Semi-Synthetic, Universal Motor Oil, For A Mixed Vehicle Fleet, Intended For Modern Powerful And Highly Accelerated Diesel Engines With (And Without) Turbocharging From European, American, Asian Manufacturers. Container 20 L. For Environmental Class Engines Up To Euro-4 And Some Euro-5 Engines Inclusive, Where Performance Levels Of Sae 15W40, Api Ci-4, Acea E7 Are Required, Motor Oil. Gost 10541-2020. Synthetic, All-Season Sae 5W40 For Cars, Light Suvs, Minivans And Light Trucks. For Gasoline And Diesel Engines (With And Without Turbocharging) Of A Wide Range Of Vehicles, Where A Viscosity Of Sae 5W-40 Is Required, And The Level Of Performance Properties Acea A3/B4, Api Sn/Cf And Lower Is Required, Compliance With International Standards Iso 9001 Iso 14001 Iso/Ts 16949 Iso 45001. Containers Not Exceeding 5 Liters., Synthetic Transmission Oil. Gost 23652-79. For Use In Gearboxes, Transfer Cases, Power Take-Offs And Other Components That Require Api Gl-4 Sae 75W90 Oils. Container 4 Liters. Kinematic Viscosity At 100 °C, Mm2/ With Astm D 445—15.1. Dynamic Viscosity At -40 °C, Mpa*S - 120,000. Flash Point In An Open Crucible, °C 237, Pour Point, °C -42, Density At 15 °C, Kg/M3 839.