Tenders Are Invited For Shield;Riot;4Mm Polycarbonate;1000X600mm

Quotation are invited for Shield;Riot;4mm Polycarbonate;1000x600mm Delivery Date: 2026/12/14 Delivery To: Metro Police Head Quarters MATERIALS STORE / PH: 427 5091 Delivery Address: 7 Martin Hammerschlagg road, Cape Town Closing Date: 2026/09/23 Closing Time: 04:00 PM Description: Shield - type: riot; material: 4mm polycarbonate; size: 1000mm x 600mm; application: provide protection against impact during law enforcement altercation; specifications: the shield itself to be manufactured with sabs approved 4mm thick clear polycarbonate plate. The three handgrips on the shield to be manufactured from solid high density poly-propylene. The forearm grip on the shield to be manufactured from polyester, velcro and a d-ring. The arm protection on the shield to be manufactured from xt expanded poly-ethylene close cell foam or similar. The four corners of the shield must be finished with a 50mm radius bend. Identification marking on front edge to display ctmpd, clearly printed in blue capital letters with a height of 100 mm on a white background affixed to the inside of the shield. The three handgrips to provide a minimum space of 120mm x 60mm to allow for a comfortable grip. The three handgrips to be affixed top, centre and bottom on the right hand side of the shield. Top and bottom handgrips to be mounted 110mm from the top (short edge) and approximately 150mm (including the curve radius) of the right side edge of the shield. The one forearm grip to be easily adjustable for different arm thicknesses and to be fixed to the left hand side of the shield by means of nuts and bolts with a diameter of 5mm and a suitable length. The nuts are of the self-locking type and washers of a suitable size are to be used. The arm protection on the shield to be 150mm x 450mm in size with a minimum thickness of 20mm and should be fixed horizontally to the centre line of the shield by means of nuts and bolts. *extremely urgent* Specification: * SHIELD;Riot;4mm Polycarbonate;1000x600mmarbonate; SIZE: 1000mm x 600mm; impact during law enforcement altercation; SPECIFICATIONS: The shield itself to be manufactured with SABS approved 4mm thick clear Polycarbonate plate. The three handgrips on the shield to be manufactured from solid high density poly-propylene. The forearm grip on the shield to be manufactured from polyester, Velcro and a D-ring. The arm protection on the shield to be manufactured from XT expanded poly-ethylene close cell foam or similar. The four corners of the shield must be finished with a 50mm radius bend. Identification marking on front edge to display CTMPD, clearly printed in blue capital letters with a height of 100 mm on a white background affixed to the inside of the shield. The three handgrips to provide a minimum space of 120mm x 60mm to allow for a comfortable grip. The three handgrips to be affixed top, centre and bottom on the right hand side of the shield. Top and bottom handgrips to be mounted 110mm from the top (short edge) and approximately 150mm (including the curve radius) of the right side edge of the shield. The one forearm grip to be easily adjustable for different arm thicknesses and to be fixed to the left hand side of the shield by means of nuts and bolts with a diameter of 5mm and a suitable length. The nuts are of the self-locking type and washers of a suitable size are to be used. The arm protection on the shield to be 150mm x 450mm in size with a minimum thickness of 20mm and should be fixed horizontally to the centre line of the shield by means of nuts and bolts. *EXTREMELY URGENT* GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/329117