Request For Quotation Purchase Of Electrical And Household Goods, Astana - Goods Will Be Accepted Strictly !

A Portable Uhf Radio Station Designed For Organizing Operational Radio Communications Between Security Officers And Personnel. Type - Portable Radio; Standard - Uhf; Operating Frequency Range - 400–470 Mhz; Output Power - 2 W; Range Of Action - Up To 5 Km; Modulation Type - Fm; Sensitivity - No More Than 0.16 Μv; Number Of Channels - 16; Coding Support - Ctcss, Dcs; Impedance - 50 Ohm; Frequency Grid Step - 12.5/25 Khz; Availability Of Channel Scanning, Monitoring, Transmission Timer, Programming Functions From A Computer; Power Source - Own Battery Cell; Number Of Batteries - 1; Battery Type - Li-Ion; Battery Capacity - 1500 Mah; Battery Life - Up To 48 Hours; Presence Of Battery Charge Level Indicator And Energy Saving Mode; Body - Plastic, Wear-Resistant; Antenna - Non-Removable; Display - Absent; Overall Dimensions - No More Than 96X55x22 Mm; Weight - No More Than 115 G; Operating Temperature - From –30 °C To +60 °C; Delivery Set: 2 Radio Stations, Charger, Stand For Charger, Clip For Fastening. Radio Stations Must Be New, Not Used, Without Mechanical Damage Or Manufacturing Defects, Fully Complete And Ready For Use. All Radios Included In The Kit Must Work With Each Other On The Same Programmed Channels And Settings. The Supplier Provides A Guarantee For A Period Of At Least 12 Months From The Date Of Delivery. The Supplied Product Must Meet The Stated Technical Specifications Or Have Equivalent Or Improved Characteristics., Autonomous Aerosol Fire Extinguishing Installation With An Automatic Thermal Activator, Designed For Local Extinguishing Of Fires In Electrical Panels, Distribution Cabinets, Automation Cabinets, Electrical Equipment And Other Closed Spaces. The Installation Must Operate Autonomously, Without Connection To An External Power Source. A Solid-Phase Fire Extinguishing Aerosol Must Be Used As A Fire Extinguishing Agent. Product Weight - 0.1 Kg. The Design Must Allow For Mounting On A Standard Din Rail. Automatic Activation Should Be Carried Out By A Temperature-Sensitive Element When The Temperature Reaches About 160–180 °C. The Startup Time After Reaching The Response Temperature Is No More Than 5 Seconds. The Installation Must Ensure The Formation Of A Fire Extinguishing Aerosol Directly In The Protected Area And Extinguish The Fire Without The Use Of Water, Foam Or Powder. The Operating Temperature Range Is No Longer From −50 To +90 °C. The Installation Must Be Intended For Use In Electrical Installations And Electrical Cabinets, Including The Presence Of Electrical Equipment. Service Life - At Least 10 Years. The Design Should Provide Compact Placement Inside The Electrical Cabinet And The Ability To Quickly Mount On A Din Rail. The Product Must Be New, Unused, Supplied In Original Packaging And Have Operational Documentation And Documents Confirming Compliance With Fire Safety Requirements. Equipment: Autonomous Aerosol Fire Extinguishing Installation, Thermal Activator And Fastening Elements For Installation On A Din Rail., Polyester. The Material Is Supplied In Rolls 1.4 Meters Wide And 50 Linear Meters Long. The Roll Winding Must Be Tight, Without Folds, Creases Or Mechanical Damage. The Permissible Deviation In Roll Dimensions Should Not Exceed ±2%. The Material For Covering Medical Couches Should Be A Synthetic Two-Layer Material Based On Polyester (Polyester Fiber) With A Polymer Coating (Pvc Or Polyurethane). The Material Must Have A Smooth, Uniform, Non-Porous Surface Without Defects, Ensuring Moisture Resistance And Resistance To External Influences. The Density Of The Material Should Be At Least 200–350 G/M². The Material Must Be Completely Waterproof, Resistant To Biological Fluids, As Well As Repeated Treatment With Disinfectants, Including Alcohol- And Chlorine-Containing Solutions. The Surface Of The Material Must Be Easy To Clean, Not Absorb Dirt And Not Subject To Cracking, Delamination And Deformation During Operation. The Material Must Have High Tensile Strength, Abrasion Resistance Of At Least 20,000 Cycles, Minimal Shrinkage And Maintain Performance Properties In The Temperature Range From -10°C To +50°C. The Material Should Not Have A Strong Odor And Should Be Safe For Use In Medical Institutions. The Color Of The Material - As Agreed, The Appearance Must Be Uniform Along The Entire Length Of The Roll, Without Defects Or Inhomogeneities., Solar Control Mirror Film For Internal Application On Glass Surfaces, Designed To Reduce The Intensity Of Solar Radiation, Prevent Overheating Of Rooms, Protect Against Ultraviolet Radiation And Increase Visual Privacy. Fabric Width - 1.52 M, Roll Length - No Less Than 30 M, Total Thickness - No Less Than 56 Microns (2 Mil), Light Transmission - No More Than 8%, Solar Energy Delay - No Less Than 82%, Degree Of Ultraviolet Radiation Blocking - No Less Than 99%. Operating Temperature Range - From −40 °C To +80 °C. The Film Must Have A Multilayer Structure Based On A Polymer Material With A Metallized Reflective Layer, A Protective Coating Against Mechanical Damage And An Adhesive Layer For Reliable Fixation On The Glass; Construction - At Least 2 Layers. Color - Silver, With A Pronounced Mirror Effect. The Adhesive Layer Must Ensure Uniform Adhesion Of The Material To The Glass Without Peeling, Formation Of Bubbles And Visual Distortions, Subject To The Installation Technology. The Surface Of The Film Must Be Resistant To Moisture, Detergents And Operational Mechanical Stress. The Material Should Reduce The Penetration Of Solar Heat Into The Room, Reduce The Fading Of Interior Decoration And Furniture Under The Influence Of Uv Radiation. The Film Must Be Suitable For Installation On Window Glass And Double-Glazed Windows Without Dismantling The Structures, Supplied In Factory-Made Rolls, Without Folds, Tears, Scratches, Clouding Or Other Manufacturing Defects.