Request For Quotation Laboratory Instruments And Equipment

Conical Glass Flask 250 Ml - 10 Pieces• Capacity: 250 Ml• Graduation Value: 25 Ml• Neck Diameter: 34 ± 1.5 Mm• Bulb Diameter: 85 ± 2.0 Mm• Height: 140 ± 3.0 Mmdescription:The Conical Flask (Erlenmeyer) Is Intended For Filtering, Evaporation, Distillation, Distillation, Distillation And Synthesis In Laboratory Conditions.Made From Heat-Resistant Glass Ts In Accordance With Gost 21400-75 And Equipped With An Approximate White Scaleproduct Requirements:The Product Must Be Previously Unused, Of High Quality And Fully Comply With The Customer’S Technical Requirements., Burettesglass 25.0 Mlburettes Without Tap, With Oliveinstead Of Balls, You Can Use Clamps10 Piecesa Burette Is A Tube Made Of Transparent Glass Without Side Outlets. There Is A Graduation On The Walls That Indicates The Capacity (Volume From 0 To 25 Ml), The Zero Mark Is Located At The Top Of The Burette.The Upper Part Of The Burette Is Open, And The Lower Part Narrows, Forming An Olive; Using A Rubber Or Silicone Tube, A Glass Tip With A Drawn-Out Spout Is Placed On It.1- Type 1 - No Waiting Time1-3 - Version 3 - With Olive And Tip1-3-2- 2Nd Class. Accuracy1-3-2-25 - Burette Volume 25 Ml1-3-2-25-0.1 Scale Division Price 0.1 Mlproduct Requirements:The Product Must Be Previously Unused, Of High Quality And Fully Comply With The Customer’S Technical Requirements., 100 Ml Volumetric Flask With Stopper -10 Pieces Glass Volumetric Flasksvolumetric Flask Duran Group 100 Ml, Ns12/21, With Stopper, Glass Measuring Flask With Stopper- Volume: 100 Ml- Height: 170 Mm- Diameter: 61 Mm- Ns12/21- 2 Pcs/Pack- Glass- With Stopper (Pe)Product Requirements:The Product Must Be Previously Unused, Of High Quality And Fully Comply With The Customer’S Technical Requirements., Mora Pipette 100 Ml10 Piecesplastic Pipette Groupmora Pipette With Extension 100 Ml Mora Pipettes, 1 Label, Polypropylene, Volume 100 Ml, Good Transparency. Blue Printed Graduations And Inscriptions. Calibration For Complete Emptying. Exposure To Temperatures Up To 60°C Does Not Affect Accuracy. It Is Recommended To Wash At Temperatures Below 60°C To Preserve The Graduations And Inscriptions.Volume 100 Mlproduct Requirements:The Product Must Be Previously Unused, Of High Quality And Fully Comply With The Customer’S Technical Requirements., Small Test Tube Brush - 5 Pieces• Length 190 Mm• Length Of The Part With Bristles 70 Mm• Bristle Diameter 20 Mm• Natural Bristlespurpose:Used For Washing Laboratory Glassware.Benefits:• Natural Bristles Provide The Best Care For The Walls Of The Cookware.• Stainless Steel Base Ensures Long Service Life.Product Requirements:The Product Must Be Previously Unused, Of High Quality And Fully Comply With The Customer’S Technical Requirements., Mora Pipettes 10 Ml - 10 Piecesplastic Pipette Groupmora Pipette With Extension 10 Ml Mohr Pipettes, 1 Mark, Polypropylene, Volume 10 Ml, Tolerance 0.04 ± Ml, Total Length 440 ± 10 Mmmora Pipettes, 1 Label, Polypropylenegood Transparency. Blue Printed Graduations And Inscriptions. Calibration For Complete Emptying. Exposure To Temperatures Up To 60°C Does Not Affect Accuracy. It Is Recommended To Wash At Temperatures Below 60°C To Preserve The Graduations And Inscriptions.Volume 10 Mltolerance 0.04 ± Mltotal Length 440 ± 10 Mmproduct Requirements:The Product Must Be Previously Unused, Of High Quality And Fully Comply With The Customer’S Technical Requirements.