Tenders Are Invited For Preparation Of Design Documentation For The Task Titled: Reconstruction Of District Road No. 3510W Kaszów - Bród.

1. Description Of The Existing Conditionthe District Road No. 3510W Kaszów - Bród On The Łępin - Żabia Wola Section Is A Through Road With A Road Cross-Section With Roadsides And Green Areas On Both Sides, The Road Width Is 5.50 M. The Beginning Of The Study Is Located At The Height Of Plot No. 510, The Intersection With The Internal Unpaved Road And The End At The Height Of Plot No. 127/1, County Border. The Width Of The Road Lane Is From 10.0 M To 16.0 M. The Road Along The Length Of The Reconstruction Runs Through Built-Up Areas. On The Section Planned For Reconstruction, The District Road Forms One Intersection With A Paved Municipal Road. There Is Technical Infrastructure In The Road Area. Annex No. 2B Indicates The Scope Of The Study. Mileage Of Reconstruction: From Km 0+820 To Km 1+140 And From Km 1+830 To Km 3+100, The Total Length Of The Sections To Be Reconstructed Is Approx. 1,590 M. 2. Design Assumptions2.1. Design Data: As Part Of The Reconstruction, Two Sections Of The Pedestrian Sidewalk Should Be Designed, Located Directly Next To The Road, Along With Exits To The Property. Road Drainage Should Be Designed Within The Road Area. A New Project For Permanent Traffic Organization Should Be Developed For The Whole. 2.1.2 Road Drainage:1. Due To The Existing Ditches And Green Areas, Drainage Should Be Planned Using Them. - If It Is Not Possible To Drain Water In The Above-Mentioned Manner, Other Technical Solutions Should Be Proposed.2.2 The Documentation Should Be Prepared In Accordance With Applicable Regulations And Principles Of Technical Knowledge.2.3 The Design Documentation Should Be Prepared In A Complete State From The Point Of View Of The Purpose It Is To Serve.2.4 The Design Documentation Will Be The Basis For The Implementation Of Construction Works.2.5 The Design Documentation, Bill Of Quantities And Technical Specification For The Execution And Acceptance Of Works Should Be Prepared In Accordance With The Principles Set Out In The Ministers Regulation Infrastructure Development And Technology Of December 20, 2021 On The Detailed Scope And Form Of Design Documentation, Technical Specifications For The Execution And Acceptance Of Construction Works And The Functional And Utility Program. The Bill Of Quantities Should Take Into Account The Maximum Possible Consolidation Of Individual Construction Works. At The Stage Of Preparing The Bill Of Quantities, It Is Required To Make Arrangements With The Ordering Party Regarding The Form, Scope Of The Bill Of Quantities And The Method Of Consolidating The Bill Of Quantities Items.2.6. The Investors Cost Estimate Should Be Prepared In Accordance With The Regulation Of The Minister Of Infrastructure, Development And Technology Of December 20, 2021 On Determining The Methods And Basis For Preparing The Investors Cost Estimate, Calculating The Planned Costs Of Design Works And The Planned Costs Of Construction Works Specified In The Functional And Utility Program. 2.7 Water Law Report Or