Tenders Are Invited For Maintenance And Maintenance Of Forest Roads In The Wejherowo Forest District In 2026

The Task Is To Eliminate The Resulting Losses And Deformations On A Given Forest Road In Order To Adapt It To Standard Use And To Restore Its Operational And Technical Parameters, Including Increasing The Aspect Of Safety Of Use. The Length Of The Works In Question Varies Depending On The Needs For A Given Road, And The Exact Location Of The Works On The Road Will Be Indicated Each Time By The Investor.3.1. Material Scope Of The Subject Of The Order: Main Scope Of Work: 1. Profiling And Compaction Of The Existing Road Surface Using A Motor Grader And An Appropriate Smooth And Rubberized Road Roller* (If Required On A Given Section/Depending On The Type Of Surface To Be Constructed) In A Generally Linear Manner On Longer Road Sections Or Locally On Shorter Sections As Indicated.2. Point And/Or Local Filling Of Defects In The Existing Road Surface, The So-Called Partial Renovations Consisting Of Filling Visible Holes, Deformations And Depressions In The Road With The Supplied Crushed Stone Aggregate Kłsm 0/31.5 Mm C50/10 Along With Its Leveling And Compaction With A Thickness Of Assumed Average Of 5 Cm (Manually, Basically In The Scope Of Point Losses) And 10 Cm (Basically In The Scope Of Local Losses / Sectional).3. Point And/Or Local Filling Of Defects In The Existing Road Surface, The So-Called Partial Renovations Consisting Of Filling Visible Holes, Deformations And Depressions In The Road With Crushed Concrete Aggregate Delivered Pbsm 0/63Mm C50/10 Along With Its Leveling And Compaction With A Thickness Of Assumption, Averaged 15-20 Cm (Basically In Terms Of Local Losses / Sections With The Thickness Indicated In A Given Construction Section).4. Spot Opening Of The Road Surface By Deep Breaking It And Re-Profiling And Compacting It With The Use Of The Required Recycler/Rotor And A Motor Grader And An Appropriate Smooth And Rubberized Road Roller* (If Required On A Given Section/Depending On The Type Of Surface To Be Constructed) In A Generally Linear Version On Longer Road Sections. Road Surface Recycling Up To 10-20Cm. Adjacent Scope Of Work:• Trimming Overgrown And Elevated Ground Roadsides Along The Forest Road Along With Discarding The Obtained Material/Mining Material Into The Adjoining Forest Area Beyond The Road Crown (Scope Of Work Recommended Using The Required Wheeled Excavator With A Slope Bucket).• Construction (Replacement And/Or Reconstruction) Of A Pehd/Hdpe Dn500 Sn8 Forest Road Culvert. Length: 7.00 M, Corrugated, Pecor Type, With Im Pref. Concrete Abutments Of The L-V Type And Wooden Barriers (Set, In Accordance With The Rkp Drawing).• Construction Of C160 Steel Channel Drains On A C16/20 Concrete Footing, Together With Paving Of The Inlet And Outlet (Set, In Accordance With The Rsd Drawing).• Restoration Of Proper Installation (Adjustment) Of Openwork Road Slabs Type Iomb In The Road Surface (Using Existing Slabs).3.2 The Detailed Description Of The Subject Of The Order Includes: − Technical Documentation Constituting Annex