Tenders Are Invited For Construction Of Photovoltaic Devices (Energy-Saving Lighting) In The Warka Commune

The Subject Of The Order Is The Construction Of Photovoltaic Devices (Energy-Saving Lighting) In The Warka Commune.1. Lighting Pole A Round, Tapered Steel Pole (Tapering Towards The Top) Should Be Used, Which Will Be Placed In The Ground In Accordance With The Manufacturers Recommendations, Complete For Installation, Without The Need To Perform Additional Construction Work Related To Assembly, With The Necessary Elements For Complete Assembly, Meeting The Following Requirements: - Total Height Not Less Than 5.0 M, - Made In Accordance With The Requirements Of The Pn-En 40-5 Standard Or Equivalent, Where The Solution Is Considered An Equivalent Solution Ensuring At Least Equivalent Requirements In Terms Of Operational Properties, Safety, Durability And Technical Parameters Of The Pole, In Relation To The Requirements Resulting From The Standard Indicated By The Ordering Party. - Made Of Steel Sheet With A Thickness Of Not Less Than 3 Mm, - Anti-Corrosion Protection By Hot-Dip Galvanizing In Accordance With The Requirements Of The Pn-En Iso 1461 Standard Or Equivalent, While An Equivalent Solution Is Considered To Be A Solution Ensuring At Least Equivalent Requirements In Terms Of Operational Properties, Safety, Durability And Technical Parameters Pole, In Relation To The Requirements Resulting From The Standard Indicated By The Ordering Party - Diameter Of The Pole End Ø60 Mm, Enabling Correct And Safe Installation Of The Offered Lighting Fixture. The Pole Must Have The Ce Marking And Be Covered By The Assessment And Verification Of Constancy Of Performance (If Required For The Offered Product) In Accordance With The Regulation Of The European Parliament And Of The Council (Eu) No. 305/2011 (Cpr) And The Requirements Of The Pn-En Standard 40-5 Or Equivalent. The Pole Production Process Should Be Covered By The Factory Production Control (Zkp) System. 2. Anti-Theft Protection Each Pole Position Should Be Equipped With Anti-Theft Protection In The Form Of At Least 8 Sharpened Spikes Placed Symmetrically Around The Pole At An Angle Of 30° - 45° To The Vertical Axis.3. Solar Luminaire A Solar Luminaire With A Photovoltaic Panel Separated From The Lamp Housing Should Be Used. Solutions In Which The Photovoltaic Panel Is An Integral Part Of The Luminaire Housing Are Not Allowed. The Photovoltaic Panel Should Meet The Following Requirements: • Manufacturing Technology: Monocrystalline, • Rated Power Not Less Than 100 W, • Have The Ability To Adjust The Position In The Vertical Axis (Rotation In The Horizontal Plane), Enabling The Panel To Be Positioned Exactly Towards The South, Regardless Of The Direction Luminaire Settings.4. Energy Storagethe Luminaire Should Be Equipped With A Battery Made Using Lifepo₄ (Lithium-Iron-Phosphate) Technology With Parameters No Worse Than:• Rated Voltage Of At Least 12.8 V, • Capacity Of At Least 30 Ah, • Energy Capacity Of At Least 384 Wh, • Operational Durability Of At Least 2000 Charging And Discharging Cycles.5. Led