Tenders Are Invited For Engineering Design Services For The Construction Of Civil Engineering Works – Eichendorffschule - Demolition Of The Administration Building And Extension For Afternoon Care - Planning Services In Accordance With § 55 Hoai Technical Equipment (Hls), Service Phase 2-9

Engineering Design Services For The Construction Of Civil Engineering Works – Eichendorffschule - Demolition Of The Administration Building And Extension For Afternoon Care - Planning Services In Accordance With § 55 Hoai Technical Equipment (Hls), Service Phase 2-9. The Hls Planning Services Include: - Drinking Water Supply: Design As A Cold Water System, Ensuring Drinking Water Hygiene Using Flushing Devices. Hot Water (E.G. First Aid Room/Kitchen) Decentrally Using An Instantaneous Water Heater Or Fresh Water Station. - Drainage: Drainage Pipes Inside And Outside The Building. Connection To New Sewer Connection. The Rainwater Should Be Drained Via An Underground Trench. - Sanitary Objects: Toilets With Confirmation Plates And Urine Systems As Well As Hand Basins With Sensor-Controlled Fittings. The Sanitary Facilities Are Located In Part Of The Building That Will Be Demolished. After Demolition, Temporary Facilities Must Be Planned For School Use During Construction Work. - Heating: The Transmission Heat Requirement Should Be Covered Via Static Heating Surfaces. The Heat Is Supplied Via An Old Gas Boiler In The Basement Of The Building. This Must Be Dismantled. When Planning, A Heating Concept Must Be Developed Taking Into Account The Requirements Of The Building Energy Act. There Is No District Heating Near The Building. - Ventilation: The Classrooms And Lounges Should Be Mechanically Ventilated And Ventilated. If Possible, The Ventilation Unit Should Be Installed On The Roof Of The Building. Necessary Zoning Should Be Planned. Interior Rooms And Toilet Rooms Should Be Equipped With Energy-Efficient Individual Room Fans. Alternative Ventilation Concepts Can Be Suggested. - Msr Technology: Individual Room Control Of All Group, Office, Meeting And Other Common Rooms With Regular Occupancy Should Receive Individual Room Controller And Window Contacts. The Bms Should Be Designed In A Simple Manner And Be Central And Easy To Operate By The User. The Room Controllers Must Be Networked To Enable Central Control. The Planning Of Building Automation Can Only Be Planned Using Decentralized Control Technology. Stand-Alone Room Thermostats Will Be Used For The Project. A Classic Field Level Setup; Automation Level And Management Level Is Not Part Of The Ga Planning In This Project. There Are Therefore Only Few Requests For Ga Planning, Since The Intended Control Can Already Fulfill Its Control Tasks At The Field Level And Is Parameterized And Adjusted In The Basic Programs Already Provided By The Manufacturer Of The Room Thermostats.