Request For Quotation Water Storage Container

Water Storage Container Made Of High-Quality Polyethylene (Food Grade Polyethylene), Design (Seamless Rotational Molding Method), Volume (750 L.), Temperature. Mode (-10°C - +30°C) And Complete With Process Fittings. Primary Polyethylene (Lldpe/Hdpe), Safe For Drinking Water. Sanitary And Epidemiological Certificate For Contact With Drinking Water. Color: Blue, White, Green (With A Protective Ultraviolet Layer Against Water Blooms). Rotational Molding (No Welds, Monolithic Body).Wall Thickness: 6 Mm To 14 Mm. Complete Set And Connection Components: Neck: Screw Cap With Breathing Valve (D From 300 To 500 Mm). Threaded Fittings: Brass Or Plastic Threads At The Inlet/Outlet (D From 1/2 To 2). Possibility Of Installing Float Valves, Level Gauges And Flange Connections. Levels: Inserts The Lower And Upper Collectors On All 3 Containers Must Be Strictly At The Same Height For Correct Operation. Lower Collector And Drain System: In The Lower Part Of Each Container, Closer To The Bottom, A Plastic Or Brass Fitting (Inset) D 3/4 Or 1 Is Mounted Onto Each Insert. A Straight Ball Valve Is Screwed Onto Each Insert. After The Individual Valves, All 3 Pipes Are Connected Through Tees Into A Common Manifold. At The End Of The Common Manifold A Main Drain Ball Valve Is Installed. In The Upper Side Part Of Each Container (Under The Lid Itself) A Similar Insert Is Made For The Top Pipe. A Ball Valve Is Also Installed On Each Top Insert. Pipes From The Top Valves Are Combined Into A Common Line To Simultaneously Fill All Containers And As An Overflow/Air Exchange System So That The Water Level Is Equalized In All Vessels. At The Top Point Of The Common Manifold, An Open Pipe With A Mesh Must Be Left And Removed Breather So That The Container Does Not Crush When Collecting And Draining Water. Container Size L * W * H: 1485 Mm * 550 Mm * 1475 Mm. Service Life: 25–50 Years. St Too 40242405-014-2009 Gost R50962-96. Delivery And Unloading To The Customer’S Warehouse Is Carried Out By The Supplier. The Product Must Be New And Confirmed By Certificates.