Tenders Are Invited For Protection Of The Road Body No. 5431/4 In Małe Ciche.

The Subject Of The Order Is The Protection Of The Road Body No. 5431/4 In Małe Cich On A Section Of Approx. 50 Meters, The Scope Of Which Includes: 1) Measurement Works For Linear Earthworks, 2) Renovation Works - Milling Of Bituminous Surface With A Thickness Of 4 Cm With Removal Of Demolition Material For A Distance Of Up To 5 Km - Profile And Underground,3) Earthworks Performed With Backhoe Excavators In The Group Category Iii-Iv With Transport Of Excavated Material Over A Distance Of Up To 1 Km. Self-Unloading, 4) Mechanically Made Troughs, Mainly 30 Cm In The Soil Of Categories Ii-Vi Along The Entire Width Of The Road And Sidewalks, 5) Stabilization Of The Ground With Cement Using A Stabilization Unit - (Possible Re-Graining) Up To Rm = 6 Mpa, Layer Thickness After Compaction 25 Cm, 6) Upper Layer Of The Foundation Made Of Natural Aggregates. 15 Cm,7) Substructure Made Of Crushed Aggregate - Upper Layer With A Thickness After Compaction Of 8 Cm,8) Vertical Adjustment Of Manholes For Street Drainage Grates,9) Excavations And Trenches Made With Backhoe Excavators 0.40 M3 For Dumping In The Soil Of Category Iii,10) Preparation And Installation Of Reinforcement Of Foundations For Machines - Ribbed Rods, Execution Of Reinforcement Of A New Reinforced Concrete Slab - Expansion Joint At Least Every 10 M,11) Concrete Surface - Bottom Layer, 12 Cm Thick - (Polypropylene Fibers), Ultimately 20 Cm,12) Surfaces Made Of Mineral-Bituminous Asphalt Mixtures, 4 Cm Thick (Wearing Layer),13) Preparation And Installation Of Reinforcement For Machine Foundations - Ribbed Rods - Execution Of Reinforcement And Joining The New Slab With The Existing One - Expansion Joint At Least Every 10 M,14) Concreting Of Straight Walls Reinforced With Traditional Formwork,15) Traditional Formwork Of Straight Concrete Or Reinforced Concrete Walls,16) Making Paving Of Natural Stone, Medium Stone On The Crowns Of Buildings With Spherical Surfaces. Paving Thickness 20 Cm - Sewage Outlet,17) Drilling With A Mechanical-Rotary System And Cementing Holes With A Diameter Of From 76 To 93 Mm And Depth. Drilling Up To 10 M In Cat. Reinforced Concrete Resistor,19) Making Baskets From Steel Mesh Without Plaster - Baskets With Dimensions (0.5*1.0*5M) - 12 Pcs.