Tenders Are Invited For Successful Delivery Of Vertical Markings For The District Road Administration In Iława

1. The Subject Of The Order Is The Successive Delivery Of Vertical Signs For The Needs Of The District Road Administration In Iława.1) Sign Shields Should Be Made Of Galvanized Sheet Metal With A Thickness Of Min. 1.25 Mm Double Edge-Bent, And For The Board Surface > 1 M2 - Min. Thickness 1.5 Mm, Double-Bent At The Edges, And Additionally The Corners Of The Sign And Board Should Be Rounded.2) The Back Side Of The Sign Board Should Be Protected With Matt, Non-Reflective, Dark Gray Spray Paint, With A Coating Thickness Of Min. 60 Microns.3) The Reflective Foil Used To Make The Sign Should: Type 2 Foil - Have A Seven-Year Shelf Life And Be Fully Bonded To The Sign Face During This Period.4) The Signs Must Comply With The Regulation Of The Minister Of Infrastructure Of July 31, 2002 On Detailed Technical Conditions For Road Signs And Signals As Well As Road Traffic Safety Devices And The Conditions For Their Placement On Roads (I.E. Journal Of Laws 2019.2311). In The Event Of Changes To Existing Regulations, New Regulations Should Be Applied.5) Reflective Foils Used To Make Sign Faces Must Have Valid Technical Approvals From Ibdim (Issued Before 2017) Or Valid National Technical Assessments. The Signs Must Have A National Certificate Of Conformity.6) Each Delivery Of Signs Must Be Accompanied By Valid Ibdim Technical Approvals (Issued Before 2017) Or Valid National Technical Assessments.7) Galvanized Smooth Pipes With A Seam With A Diameter Of 60.3 X Wall Thickness Of At Least 2.8 Mm To 3.3 Mm Should Be Used For The Supporting Structures.8) The Shields Should Be Attached To The Supporting Structures Be Made Using Connecting Elements, Brackets, Screws, Washers And Nuts Made Of Hot-Dip Galvanized Steel Or Other Material Equally Resistant To Corrosion.9) Road Sign Posts Should Have Two Metal Elements Welded Transversely To The Post In Its Lower Part, 30 Cm Long, Each At A Distance Of 20 Cm From The Other, In Order To Permanently Mount The Post In The Ground.10) Reflective Foiled Signs In Accordance With The Assortment Given In The Form Price.11) Delivery At The Suppliers Expense According To The Ordering Partys Notification To The Headquarters Of The Road District In Iława 14-200 Iława, Ul. Wyszyńskiego 45.12) Delivery At The Suppliers Expense According To The Ordering Partys Notification To The Headquarters Of The Road District In Susz 14-240 Susz, Karolewo 17A.13) The Delivery Being The Subject Of The Order Will Be Carried Out Successively According To The Ordering Partys Needs.14) Transport And Unloading Of The Goods At The Ordering Partys Yard Is The Responsibility Of The Contractor.15) The Quantities Specified In The Offer Form Are Estimated Quantities, Provided For The Purpose Of Preparing And Submitting An Offer. The Ordering Party Reserves The Right To Change The Quantity (Reduce Or Increase) Of The Ordered Road Signs And Road Traffic Safety Elements, As Well As To Cancel Orders For Particular Types (Types) Of Road Signs And Road Safety Elements