Tenders Are Invited For Artificial Lawn – Reconstruction Of Synthetic Lawn On The 11X11 Field At The Peace And Friendship Stadium

Artificial Lawn – Reconstruction Of Synthetic Lawn On The 11X11 Field At The Peace And Friendship Stadium. The Physical Object Of This Announcement Concerns The Supply And Installation Of Technical Turf On The 11 X 11 Pitch Of The Peace And Friendship Stadium, With A Total Area Of 10,000 M² And Includes In Particular: A) Removal, Collection And Removal Of The Existing Synthetic Turf And Infill Materials, In Accordance With The Conditions Of The Study And The Applicable Environmental Legislation, B) Inspection And Preparation Of The Existing Leveling, Smoothness, Rain Runoff And Any Local Irregularities, C) Supply, Transport, Unloading, Storage And Complete Installation Of The Latest Generation Synthetic Turf, With Monofilament Two-Color Fibers, D) Supply And Application Of The Necessary Connection Tapes, Adhesive Materials, Filler Materials And Striping Materials, E) Welding And Integral Connection Of The Rolls, Complete Competitive Marking And Final Shaping Of The Surface, F) Sand Distribution (Quartz Sand) And Distribution Of Sbr Rubber Microspheres In Proportion By Weight According To The Consumption Of The Filler Materials Found In The Laboratory Test Report Of The Carpet, From A Certified Laboratory (Fifa Accredited Laboratory Test Institute), G) Combing The Fibers, H) Lettering Which Will Consist Of White Strips Of The Same Type As The Basic Synthetic Turf (Not Painted On The Green) According To The Regulations, Connected In The Same Way As The Pieces Of The Basic Turf, And Width According To What Is Determined By The Current Fifa Regulation, I) Carrying Out The Prescribed Laboratory And On-Site Checks And Delivery Of The Technical Brochures, Certificates, Test Reports And Guarantees, J) Final Inspection And Delivery Of The Field Ready For Safe And Full Use. Specifically, And With Regard To The Technical Specifications, The Following Are Requested: Coating With Synthetic (Artificial) Turf Of The Latest Generation. That Is, Supply, Transportation, Installation, Marking And Delivery Of Ready-To-Use, Last-Generation Synthetic Turf With Monofilament Two-Color Fibers According To The Service Study. The Quality Of The Thread Will Be 100% Polyethylene, At 16,000Dtex And Will Have A Main Undercoat Of Double Polypropylene And A Secondary Of Pu Latex, With Protection Against Ultraviolet Radiation. This Elastic Underlay Must Be Able To Drain Water From Runoff Outlets, 4Mm In Diameter Every 10X10cm. The Pile Height Will Be 50Mm And The Total Height (Undermount And Pile) At 52Mm. The Total Weight Will Be 2,780 Gr/M2 (±1%) And The Pile Weight At 1,437Gr/M2, While The Number Of Seams At 9,450 Fibers/M2 (±3%). The Rolls, 4.00 M Wide, After Being Laid Out, Are Welded To The Joints With Special Tapes, On Which Polyurethane Glue, With A Bio-Based Content Of 97%, Two Components, Is Spread, In Order To Achieve An Inseparable Connection Between Them. Where The Field Lines Are Defined, The Striping