Tenders Are Invited For Screed Works – Screed Work - New Impc Building, Building 2441, Beethovenstraße, 38106 Braunschweig

Screed Works – Screed Work - New Impc Building, Building 2441, Beethovenstraße, 38106 Braunschweig. The Screed Is Created After The Drywall And Masonry Walls Have Been Completed. An Edge Insulation Strip Is Installed All Around. Non-Combustible Edge Insulation Strips Of Class A1 Must Be Used In The Stairwells Th01 And Th02 As Well As In The Corridor Between Axis O And P. Three Types Of Screed Are Used: A Cement Screed On A Separating Layer, A Composite Screed And A Floating Screed. To Create A Flat Surface And Different Heights For The Floor Coverings, The Screeds Are Designed At An Adjusted Height. Designer Screed: A Sanded Designer Screed With A Thickness Of 10 Mm Must Be Applied To The Screed. This Is Coated After Multiple Grinding Processes. Covering Work: The Sanded Designer Screed Must Be Protected After Completion And Covered With A Layer Of Covering Fleece With Wooden Panels On Top During The Construction Phase. Clean-Off Mats: To Accommodate The Clean-Off Mats, The Screed In The Area Of ​​The Entrances Is Made Lower Than The Screed Immediately Adjacent. Movement Joints: Due To The Larger Size Of The Areas, Movement Joints Must Be Created. In Door Areas, This Must Be Created In The Middle Of The Door Leaf. Overview Of Services The Following Services Are Broken Down (Approx. Information): - 4800 M² Shot Blasting - 4800 M² Bonding Bridge - 3450 M Edge Insulation Strips Pe Foam - 625 M Edge Insulation Strips Mineral Wool - 150 M Expansion Joints - 550 M² Floating Screed With Insulation - 1500 M² Screed On Separating Layer - 550 M² Sanded Design Screed