Request For Quotation Equipment For Fire Alarm And Automatic Fire Extinguishing Systems

The Valve Control Unit Is Designed For Operation In Fire Extinguishing And Smoke Removal Systems For Automatic And Manual Control Of An Asynchronous Motor With A Squirrel-Cage Rotor Of An Electric Valve Designed For An Operating Voltage Of 380 V. Technical Characteristics:Unit Power Consumption No More Than 50 Wnumber Of Controlled Motors 1Rated Switching Current Up To 10 Acontrolled Motor Power Up To 4 Kwtype Of Circuit Breaker 3P 10A X Coverall Dimensions No More Than 600×400×240 Mmblock Weight No More Than 20 Kgmounting Type: Wall Mountedshell Protection Degree Ip54, The Two-Wire Communication Line Controller Is Used As Part Of An Integrated Security System As A Component Unit Of A Combined Expandable Addressable Analog Device Designed To Protect Objects From Intrusion By Unauthorized Persons And From Fire. It Works By Monitoring The State Of Addressable Input Circuits, Which Can Be Represented By Addressable Security, Fire And Security-Fire Detectors And/Or Controlled Circuits Of Addressable Expanders; Control., Designed To Work As Part Of An Addressable Fire Alarm System And To Control Fire-Fighting Equipment. Together With The Devices Of The Integrated Security System, It Is Capable Of Performing The Functions Of A Fire Alarm Receiving And Control Device Of A Block-Modular Design, A Light, Sound And Voice Warning Device, As Well As Control Of Gas, Powder, Aerosol And Water Fire Extinguishing, Smoke Protection And Engineering Systems Involved In The Building Management Process., A Standard Module With An Operating Temperature Range From – 50 To + 50°C. Fire Extinguishing Capacity In Area/Volume Up To 50 M²/150 M³.Ceiling Mount.Designed For Automatic Suppression Of Fires Of Classes A (Solid Substances), B (Liquid Substances), C (Gaseous Substances) And E (Electrical Equipment Under Voltage Without Taking Into Account The Breakdown Voltage Parameter Of The Fire Extinguishing Powder).Overall Dimensions: Height (With Bracket Installed) 239 Mm, Diameter 286 Mm, The Fire-Security Light Annunciator (Light Indicator) Is Designed To Indicate Emergency Exits, Indicate Evacuation Routes For People In The Event Of Danger, And Also As An Information Board.Specifications:Dc Supply Voltage, V 24Rated Current Consumption, Ma 20Shell Protection Degree, Ip 55Overall Dimensions, Mm 300 X 100 X 25Weight, Kg, No More Than 0.18Operating Temperature Range, ºс -30…+55Relative Humidityat +25 ºс, %, No More Than 95, The Electronic Valve Dn 50 (Diameter 50 Mm) For Fire Extinguishing Is A Shut-Off Device With An Electric Drive. It Automatically Or Remotely Opens The Flow Of Water In Pipes In Case Of Fire. Diameter (Dn): 50 Mm (2 Inches).Pressure (Py): 16 Bar (1.6 Mpa).Control: Electric Drive (From Alarm Signal) Plus Manual Override.Medium: Water Or Foaming Agentquick Start Of Water Based On A Signal From A Smoke Sensor Or Remote Control.Reliable Tightness Of Flow Shutoff., Cable (Wire) 1X2x0.80 Designed For Group Indoor Stationary Installation, Including For Use As Part Of A Fire-Resistant Cable Line (Okl). The Cable Is Resistant To Relative Air Humidity Up To 98% At Temperatures Up To 35°C. The Conductor Is Single-Wire Copper, The Insulation Is Silicone Rubber, The Core Is Double Twisted.