Request For Quotation Purchasing Equipment For The “Industrial Mechanic” Competency

Number Of Correction Planes, 2 Pcs;Place Of Installation Of Balancing Weights: Impeller, Auger;Impeller Diameter, 160Mm;Number Of Holes For Installing Balancing Weights On The Wheel, 36 Pcs;Number Of Sectors For Installing Balancing Weights On The Auger, 5 Pcs.;The Angle Between The Places Where The Balancing Weights Are Installed On The Impeller Is 10°; The Standard Size Of The Holes For Installing Balancing Weights Is M6; Number Of Platforms For Installing A Vibration Transducer, 12 Pcs; Electric Motor Power, 1.5 Kw;Movement Of The Electric Motor In The Vertical Plane In The Range (From The Axis Of Rotation Of The Stationary Shaft) - From -1 To +2 Mm;Movement Of The Electric Motor In The Horizontal Plane In The Range (From The Axis Of Rotation Of The Stationary Shaft) - From -5 To +5 Mm;Minimum Shaft Rotation Speed When Power Is Supplied To The Motor Using A Frequency Controller That Allows You To Change Direction, Rpm -0;The Maximum Shaft Rotation Speed When Power Is Supplied To The Engine Using A Frequency Controller That Allows You To Change Direction Is 1500 Rpm;The Stand Provides The Ability To Balance On 2 Correction Planes With A Maximum Residual Vibration Of 0.3 Mm/Sec;Mains Frequency, 50 Hz-;Input Voltage, 220V;Voltage-1F;The Degree Of Protection Of The Frequency Converter Is Ip20;Current Strength, 8A;Possibility Of Reverse Rotation, Yes; Relative Humidity Less Than 90%;Operating Temperature, From +15 To +25°C;Storage Temperature, From -20 To +65°C;Overall Dimensions Of The Training Stand, No More Than 1200 X 650 X 315 Mm;The Weight Of The Training Stand Is No Less Than 70 Kg;Overall Dimensions Of The Training Stand In The Package, 1200X840x425 Mm;Weight Of The Training Stand In Packaging, 117.5 Kg;Overall Dimensions (Lxwxh) Of The Workbench In The Package, 1320X760x200mm;The Weight Of The Workbench In The Package Is 86.8 Kg.