Request For Quotation Automated Workstation For Breeder

Automated Workstation For A Breeder. 1. Table Made Of Chipboard Covered With Gray Laminate. A Hole Is Made In The Tabletop For Removing Straw, And A Garbage Chute Is Screwed To The Bottom Of It, Through Which The Straw Gets Into The Container.2. The Cabinet Is Made Of Gray Laminate, The Edges Of Which Are Finished With Edging. The Cabinet Consists Of Two Drawers For Storing Documents And A Bag For Collecting Chaff. The Neck Of The Chaff Bag Comes Out Through The Table Top Of The Cabinet, In Which A Special Hole Is Made, And Is Placed On The Thresher Collection. A Ventilation Grille Is Attached To The Side Wall Of The Chaff Box; It Provides Ventilation For The Air Flows Created By The Thresher. 3. The Mobile Sheaf Rack Is Designed For Preparing Breeding Material. It Is Equipped With A Special Channel For Removing Debris And A Bag For Collecting It.4. Container For Short-Term Straw Storage. Equipped With A Straw Removal Bag. It Consists Of Three Rolled Sheet Parts, Two Of Which Are The Side Walls, And The Other The Container Frame, Riveted Together. Has A Polymer Coating.5. The Ruler Is Designed For Measuring Stems, Internodes And Ears From 1 To 1,500 Mm; It Is Equipped With A Special Backlight. The Ruler Scale Is Protected From Scuffing And Scratches And Has A Laminate Coating.6. The Mesh Area Is Designed For Visual Inspection Of The Plant, While Unnecessary Plant Debris Passing Through The Mesh Ends Up In The Container. The Mesh Platform Is Attached To The Table On Ball Guides, Which Ensures Its Parallel Movement Relative To The Table At A Distance Of 250 Mm From The Ruler. This Movement Opens A Hole To Dump The Stem Into The Straw Container Located Under The Table.7. Electronic Scales With A Resolution Of No More Than 0.1 G. 8. Flash Drive With A Special Program.