Tenders Are Invited For Construction And Installation Of A Photovoltaic Installation On A Steel Structure At The Building Of The District Sports Hall Kujawianka - Iii Secondary School. Queen Jadwiga In Inowrocław

1. The Subject Of The Order Is The Construction And Installation Of A Photovoltaic Installation With A Capacity Of 44 Kwp To 45 Kwp On A Steel Structure With An Energy Storage With A Capacity Of 60 Kwh, Next To The Building Of The District Sports Hall Kujawianka - Iii Secondary School. Królowej Jadwigi In Inowrocław, Ul. Narutowicza 53, Register No. 3/5, Precinct 0003 Inowrocław.2.The Installation Was Designed As A Ground-Based, Free-Standing One, In Two Parts Differing In The Type Of Supporting Structure: - Part I - Modules On A Double-Supported Steel Supporting Structure Made Of An Hea 200 Type I-Beam (Or An Equivalent Solution Ensuring At Least The Same Parameters Of Load-Bearing Capacity, Stiffness, Durability And Load Resistance As The Hea 200 Type Profile), Placed On Foundation Footings, In Accordance With The Technical Design Attached To Swz. – Part Ii – Bifacial Modules On A 2×Pion Type Support Structure (Two-Support, Driven Into The Ground, Vertical Module Orientation).3.The Minimum Parameters Of The Devices And Supporting Structures Are Listed In Annex No. 9 To The Swz And In The Technical Design. The Technical Design Together With The Drawings Constitute An Annex To The Swz With The Indication That The Provisions From Page 14 (Point Iv - Basic Calculation Results) To Page 50 (Cross-Section Legend) Will Apply To The Execution Of The Subject Of The Order. The Provision In Point Does Not Apply. Ii Point. 1 - Tender Guidelines For A Photovoltaic Installation On The Roof Of A Gymnasium, As The Subject Of The Order Is The Construction And Assembly Of A Photovoltaic Installation With A Capacity Of 44 Kwp To 45 Kwp On A Free-Standing Steel Structure With An Energy Storage Facility With A Capacity Of 60 Kwh. The Technical Design Contains Technical Data Of The First Part Of The Steel Structure, While Annex No. 9 To The Swz Contains Technical Data Of Photovoltaic Panels With Energy Storage Units And Technical Data Of The Second Part Of The Steel Structure. Conditions Of Implementation, Acceptance And Warranty1.All Installation And Device Elements Must Be Brand New, Manufactured In Accordance With Applicable Safety And Quality Standards.2.The Subject Of The Order Will Be Accepted After The Steel Structure And Photovoltaic Installation Have Been Installed And Reported To The Operator, On The Basis Of A Delivery And Acceptance Protocol Signed Without Any Comments, Which Will Be The Basis For Issuing An Invoice And The Warranty Periods.3.The Manufacturers Quality Warranty Will Be Provided For The Devices And Modules For The Following Periods: – Inverter/Inverters – At Least 5 Years; – Energy Storage – At Least 5 Years; – Photovoltaic Modules – Product Warranty Of At Least 12 Years, Warranty For Linear Power Efficiency Of At Least 30 Years With An Efficiency Level Of Min. 85% In The 30Th Year; – Supporting Structure – At Least 10 Years.4.The Ordering Party Requires The Contractor To Provide A Quality Guarantee For The Assembly Works For A Minimum Of 3