Tenders Are Invited For Construction Of Road Lighting In The Głusk Commune In 2026

4.1.The Subject Of The Order Is Construction Of Road Lighting In The Głusk Commune In 20264.2.Pursuant To Article 91(1) Of The Public Procurement Act, The Ordering Party Allows The Submission Of Partial Offers Divided Into 2 Parts As Follows:4.3.Lot 1 Of The Order:4.3.1. Part 1 Of The Order: Construction Of Lighting For Municipal Road No. 107102L In Kazimierzówka (Starting From The S12 Service Road On The Lublin - Piaski Route, Ending At The Height Of Plot 74/8 In Kazimierzówka) The Scope Of Works Includes In Particular: - Construction Of A Cable Line Along The Route Length Of Approximately 1,770 M With The Installation Of 45 Pieces Of Round Galvanized Steel Poles, Including The Following Height: 9 M - 41 Pieces, 6M - 2 Pieces (Lighting The Pedestrian Crossing Near The Church)) And 10M - 2 Pieces. Steel Booms, 1 Semicircular Arm, 1.5 M, Compatible With Poles - 45 Pieces. Poles Mounted On A Concrete Foundation. Lighting Fixtures With An Led Source Equipped With A Controller Cooperating With The Controller Located In The Szo, In The Amount Of 45 Pieces, Including: New Fixtures In The Amount Of 28 Pieces And Lighting Fixtures (Commune Assets) To Be Used From The Existing Lighting In The Amount Of 17 Pieces. - Disassembly Of: The Lighting Network Including The Poles Of The Overhead Lighting Line, The Overhead Lighting Line, Dismantling 17 Pieces Of Led Fixtures To Be Reinstalled On New Poles, Dismantling Of 2 Road Lighting Cabinets (According To Separate Design Documentation) - In Order To Power The Constructed Lighting: Construction Of The Szo Cabinet - Kazimierzówka 8 Consisting In Moving The Existing (Completely Equipped) Szo Kazimierzówka 2 (To Be Dismantled) In Place Of The Planned Return Loop In Kazimierzówka To Plot No. 166/14 (According To A Separate Design Study). A Detailed Description Of The Subject Of The Order Can Be Found In Annex No. 1 To The Swz (For Part 1 And Part 2 Of The Order). It Consists Of The Following Documents: 1) Design Documentation, 2) Detailed Technical Specifications For The Execution And Acceptance Of Works (Stwior), 3) Bills Of Quantities.