Tenders Are Invited For Sorting And Screening Machines – Delivery Of A Drum Screening Machine

Sorting And Screening Machines – Delivery Of A Drum Screening Machine. Purpose Or Area Of ​​Application: The Göttingen Waste Disposal Companies Operate A Bioenergy Center (Bez) At The Königsbühl Site, In Which Organic And Green Waste Is Processed Into Compost. The Drum Sieve Machine Described Below Is Used In The Bioenergy Center For The Sieving Of Woody Fractions After Composting In Order To Obtain A Compost Free Of Impurities With A Grain Size Of 0-12 Mm. The Cost-Effectiveness Of The Drum Screening Machine Is One Of The Most Important Criteria For Procurement. A Low Environmental Impact In All Phases Of Life As Well As Operating Conditions And A High Payload While Complying With Legal And Technical Regulations Are Of Crucial Importance. # Standards And Regulations To Be Adhered To: The Drum Screen Machine Must Comply With The Current German And European Standards And Regulations On The Delivery Date. # Documentation: Operating Instructions And Spare Parts Lists Must Be Delivered In Duplicate On Paper And Also Digitally Upon Handover. Service/Test Books And Ce Declaration Of Conformity Are Part Of The Delivery. # Acceptance/Handover: The Drum Screening Machine Must Be Transferred Directly To The Client (Client). The Machine Will Only Be Taken Over By The Göttingen Waste Disposal Company Once Any Defects That May Have Been Identified Have Been Rectified By The Contractor And If All Necessary Documents/Documentation Are Available In German. Any Defects Identified Must Be Documented In A Handover Protocol And Eliminated Within 14 Days. A One-Day Briefing, On Two Dates, For The Clients Employees (7 - 10 People) Is A Matter Of Course And Part Of The Order. Delivery Address: Göttingen Waste Disposal Companies, Königsbühl Disposal Center, Königsbühl 98, 37079 Göttingen. # Guarantee: Full Guarantee (Minimum 24 Months Or 2000 Bh) (Whichever Comes First). ### Technical Description: Drum Screen Machine: # General Requirements: - Central Lubrication Unit. # Drive / Motor: - Electro-Hydraulic Drive Max. 75 Kw, - Three-Phase Motor Ie4, - Connection For 125 A Plug. # Chassis: - 2 Axle Central Axle Trailer With Eu Road Approval, - Brake System Including Ebs And Lighting According To Ec Directive, - 80 Km/H Road Approval And Ec Operating License, - 50 Mm Ec Towing Eye, - Transport Height Max. 4.0 M, - Support Feet On Both Sides In The Front Area, - Hydraulic Support At The Rear Right Between The Sides And Rear Belt. # Material Feed: - Feed Bunker Volume At Least 5 M³, - Width Of The Loading Edge At Least 3.50 M, - Discharge Height For Coarse Fraction (At Least 3.40 M, 30 Degrees), - Discharge Height For Fine Fraction (At Least 3.45 M, 30 Degrees), - Bunker Elevation / Hopper Elevation Can Be Individually Removed On Three Sides, - Load-Dependent Controlled Material Feed From The Conveyor Floor To The Sieve Drum, - Bunker Reversible. # Cleaning Brush: - Hydraulically Foldable Cleaning Brush With Scrapers, - Arranged On The Right In The Direction Of Travel. # Discharge Belts: - Width At Least 1,000 Mm, - Length At Least 5,500