Tenders Are Invited For Construction Of Internal Roads In Natalin And Marysin

The Subject Of The Order Is The Construction Of Internal Roads In The Towns Of Natalin And Marysin. Task 1Construction Of An Internal Road Marked No. 250/39, 249/20, 248/17, 247/19 (Ul. Azaliowa) In The Town Of Natalin, Commune. Jastków:• Measurement Works On A Total Section Of Approx. 0.1 Km• Removal Of The Existing Structure Of The Dirt Road Reinforced With Aggregate,• Construction Of A Channel Along With Its Profiling And Compaction,• Construction Of An Absorption Well With A Rainwater Inlet And A Sewer,• Construction Of A Frost-Protective Layer From A Mixture Bound With A Cement Binder C1.5/2, Thickness Of 22Cm,• Construction Of A Foundation From A Mixture Bound With A Cement Binder C5/6, 20 Cm Thick, • Making A 3 Cm Thick Cement-Sand Backfill, • Making A Wearing Surface Made Of 8 Cm Thick Paving Stones, • Making 15X30 Curbs On A C12/15 Concrete Bench With A Support, • Introducing Permanent Traffic Organization And Road Safety Devices, • Carrying Out Cleaning And Finishing Works As Well As Post-Construction Inventory. Task 2 Construction Of An Internal Road Marked No. 99/34 (Ul. Słomkowa) In Marysin, Commune. Jastków: • Measurement Works On A Total Section Of Approx. 0.1 Km • Removal Of The Existing Structure Of The Dirt Road Reinforced With Aggregate, • Construction Of A Channel Along With Its Profiling And Compaction, • Construction Of A Linear Watercourse And An Absorption Well, • Construction Of A Frost-Protective Layer From A Mixture Bound With A C1.5/2 Cement Binder, 22 Cm Thick, • Construction Of A Base Course From A Mixture Bound With A Binder Cement C5/6 With A Thickness Of 20 Cm, • Making A Cement-Sand Ballast 3 Cm Thick, • Making A Wearing Surface From 8 Cm Thick Paving Stones, • Making 15X30 Curbs On A Bench With A Support Made Of C12/15 Concrete, • Adjusting The Height Of The Surface Of Existing Exits, • Introducing Permanent Traffic Organization And Road Safety Devices, • Carrying Out Cleaning Works And Finishing And As-Built Inventory. The Detailed Scope Of Works Is Included In The Technical Specification For The Execution And Acceptance Of Works As Well As In The Design Documentation. The Bill Of Quantities Is Of An Auxiliary Nature. Due To The Lump-Sum Nature Of The Remuneration Indicated In The Offer By The Contractor, The Valuation Should Be Based On The Scope Indicated In The Design Documentation And Specifications. The Occurrence, During The Execution Of The Contract, Of Works Not Included In The Bill Of Quantities Or Works In A Larger Quantity Than That Accepted In The Bill Of Quantities Will Not Entitle The Contractor To Demand Additional Remuneration.