Tenders Are Invited For Delivery Under Operational Leasing With The Option To Purchase A Used Specialized Vehicle, Such As A Three-Axle, Single-Bowl Garbage Truck, Intended For Collecting Municipal Waste

1) The Subject Of The Order Is The Supply Of A Used (Manufactured In 2022-2023) Specialized Vehicle Of The Type, Three-Axle, Single-Compartment Garbage Truck, Intended For Collecting Municipal Waste, With The Possibility Of Collecting Selective, Mixed And Biodegradable Waste, Financed In The Form Of Operational Leasing With A Purchase Option. Construction: 1. Complete Box Body With A Rear Loading Device Intended For Collecting Solid Waste. Mixed As Well As Waste Collected In Municipal Containers, Secondary Raw Materials, Bio And Bulk Waste. Load Box Capacity Min. 20 M3. Year Of Production 2022-20232. All Building Components Painted Before Assembly. Painting With Primer And Then Painted In Orange Ral 9010.3. Completely Sealed One-Piece, Integral Body Of The Box With A Crushed Abdomen Min. 5:1.4. The Sides And Roof Of The Load Box Are Made Of Structural Or Abrasion-Resistant Sheet Metal With A Thickness Of Min. 4Mm .5. The Bottom Of The Load Box Is Made Of Abrasion-Resistant Sheet Metal Or Structural Sheet Metal With A Thickness Of Min. 4Mm.6. The Loading Tub Is Made Of Abrasion-Resistant Sheet Metal With A Hardness Of Hb 425-475, With A Bottom Thickness Of Min. 10 Mm, Sides With A Thickness Of Min. 6Mm.7. Load Box With An Oval Shape.8. Linear-Plate (Drawer) Or Yoke Crushing Mechanism.9. Possibility To Control The Waste Thickening Mechanism In Automatic, Continuous And Manual Cycles.10. Control Of The Coin Validator In An Electro-Hydraulic System With A Pick-Up Function (Automatic Lifting Of Containers 60-1100 L) And Via Control Panels Mounted On Both Sides Of The Tailgate.11. Guides Of The Pushing Wall Inside The Structure - On The Side Walls.12. Coin Validator For Containers With A Capacity Of 60 L To 1,100 L.13. The Coin Validator Is Mounted On Screws, Removable (Can Be Dismantled Without The Need To Use Cutting Devices) And Made Of Steel Structure Using Anti-Corrosion Technology.14. The Loading Side Of The Validator Opens, Allowing The Loading Edge To Be Lowered To Max. 1.2 M. From The Ground, Allowing The Bags To Be Thrown In.15. The Loading Side Of The Validator Is Made Of Steel Structure With Anti-Corrosion Technology.16. Coin Validator With The Possibility Of Installing An Rfid System And A Dynamic Scale.17. Possibility To Manually Stop The Movement Of The Container At Any Time.18. Height From The Ground To The Fixed Edge Of The Validator Max. 1650 Mm.19. Two Steps For Loaders With An Occupancy Sensor And Handrails On The Sides Of The Tank.20. Possibility Of Emptying The Cargo Box From The Drivers Cabin.21. Lighting In Accordance With Applicable Road Traffic Regulations.22. Two Safety Switches (Emergency Stop) Located On Both Sides Of The Body, One In The Drivers Cabin.23. Smooth Or Gradual Compression Adjustment.24. Maximum Working Pressure Min. 210 Bar.25. Tight Construction Preventing Fluid Leakage.26. A Camera With A Color Monitor Located In The Drivers Cabin (Monitor At Least 7) Enabling Constant Observation Of The Rear Of The Car.27.