Quotation Are Invited For Calibration Tank 10L Calibration Tank 100L

Quotation are invited for Calibration Tank 10l Calibration Tank 100l Delivery Date: 2026/12/31 Delivery To: TS - Water Services TSWS Delivery Address: 58 PLANTATION ROAD, OTTERY Closing Date: 2026/09/11 Closing Time: 12:00 PM Description: 1 each x calibration tank 10l 1 each x calibration tank 100l Specification: * Calibration tank 10L Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference will be deemed to be accompanied by the words "or equivalent The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit may result in zero point allocation, including BBBEE to verify points claimed. NB!!! PLEASE ENSURE THAT YOU ATTACH THE TECHNICAL DATA SHEETS AND PICTURES OF THE ITEM QUOTED ON, TO YOUR RFQ SUBMISSION****FAILURE TO ADHERE TO THIS REQUIREMENT, MAY RESULT IN YOUR OFFER BEING NON-RESPONSIVE**** *** PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS. ALSO ENSURE THAT YOUR UPDATED DECLARATION OF INTEREST AND BBBEE IS ATTACHED AT ALL TIMES*** * Calibration tank 100L Requirements: Material of Construction: All supplied and manufactured using 1.5mm thick stainless-steel Grade-304 material. Top: Coned knuckled radius corner complete with: - Neck: Supplied and manufactured using 40NB SCH40 stainless-steel Grade-304 round tubing material complete with: - - Scale Plate: High resolution brass scale plate, centre of scale plate, in 25ml increments. - Sight Glass: A borosilicate glass tube sealed with NBR gaskets (suitable for petrol, gasoline and diesel) and secured with a machined aluminium nut. - Breather: Supplied and manufactured using 1½"-inch (40mm) stainless steel Grade-304 round tubing material. Thermowell: One (1) ½"-inch BSP socket welded to the top cone of the tank to allow for temperature readings (excluding temp gauges). Bottom: Coned knuckled radius corners to centre discharge complete with: - - Discharge Valve: 1¼"-inch (32mm) full bore, manual type, Nikel plated, ball valve, 450mm from the valve to the floor (this size from valve to the floor to be confirmed). - Legs: Four (4) legs supplied and manufactured using 2"-inch (50mm) stainless steel Grade-304 round tubing material complete with compensating plates for support and 1"-inch (25mm) round tubing for bracing. Each leg will be fitted with a rubber anti-skid adjustable/articulated foot to allow for floor level adjustment. - Finish: All the welds will be acid cleaned, mechanically ground flush and mechanically ring polished. The balance of the tank will be polished to a 180-grit finish. Contact Person: S Nyakama Contact details: [email protected] Address: Hillstar depot, Bamboosvlei,Ottery Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/328684