Tenders Are Invited For Construction And Modernization Of An Access Road To Agricultural Land Within 0001 Świerczów, Plot No. 658, And Within 0007 Nowa Wieś, Plot No. 1019 And 136/1

1. The Subject Of The Order Is The Implementation Of Works Under The Task Titled: Construction And Modernization Of An Access Road To Agricultural Land Within 0001 Świerczów, Plot No. 658, And Within 0007 Nowa Wieś, Plot No. 1019 And 136/1 2. The Scope Of Works Includes: A. Geodetic Marking, B.Mechanical Troughs With Profiling And Soil Compaction, Trough Depth 10 Cm, Approx. 2,565 M2, C.Stabilization Of The Substrate With Cement Up To Rm = 2.5Mpa, Layer Thickness After Compaction Min. 30Cm – Approx. 2,565 M2d.Making The Surface From Crushed Aggregate 0-31.5 Mm Thick. 10 Cm On An Area Of ​​Approx. 2362.50 M2, Note: The Ordering Party Requires That The Aggregate Pavement Layer Be Made Using A Bituminous Pavement Spreader.Filling The Roadsides With Troughing Material, 2 X 0.50 M Wide Roadsides - Approx. 675 M2. The Remaining Troughing Material Should Be Incorporated In The Place Indicated By The Ordering Party Within The Plots Covered By The Order. F.Making The Surface From Crushed Aggregate 0-31.5 Mm Thick. 10 Cm - On Exits To The Property And Side Roads - Approx. 149 M2 G. Replacement Of The Existing Road Culvert Made Of Dn1000 Reinforced Concrete Pipes, The Scope Of Works Includes: Dismantling The Existing Culvert Made Of Dn1000 Reinforced Concrete Pipes, Installation Of A New Culvert Made Of Dn1000 Concrete Pipes With Concrete Abutments, Installation Of A Steel Protective Barrier On Both Sides, 5 M Long Each (N2/W2/A)H.Replacement Of The Existing Road Culvert Made Of A 5.5 M Long Pvc Pipe Dn300 With A Culvert Made Of A Pp Sn8 Pipe Dn 400.I.Preparation Of An As-Built Inventory. Demolition Materials Suitable For Reuse Should Be Placed In A Place Indicated By The Ordering Party, Within 5.0 Km From The Demolition Site. The Contractor Is Obliged To Manage The Remaining Demolition Materials In Accordance With Applicable Waste Management Regulations. Note: If The Swz Or Annexes To The Swz, Including Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, Would Indicate Trademarks, Origins, Technical Approval Standards, Patents In Relation To Certain Materials And Devices, The Ordering Party, In Accordance With Art. 99(5) Of The Public Procurement Act Allows The Submission Of Equivalent Products. All Products From Specific Manufacturers Specify The Minimum Quality Parameters And Functional Features That The Goods Must Meet In Order To Meet The Requirements Set By The Ordering Party And Constitute Only A Quality Standard Of The Subject Of The Order. By The Provision Regarding The Minimum Requirements For Quality Parameters, The Ordering Party Understands The Requirements Of The Goods Contained In Publicly Available Sources, Catalogs And Manufacturers Websites. The Use Of Exemplary Manufacturers Names Is Only Intended To Clarify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. Therefore, The Use Of Manufacturer/Product Names Is For Example Purposes Only. When Describing The Subject Of