Tenders Are Invited For Architectural, Construction, Engineering And Inspection Services – General Planning Services - Renovation And Expansion Of The Melle-Buer Primary School

Architectural, Construction, Engineering And Inspection Services – General Planning Services - Renovation And Expansion Of The Melle-Buer Primary School. The Subject Of The Order Is The Planning Services Of - Object Planning For Buildings And Interior Spaces (§§ 33 Ff. Hoai In Conjunction With Appendix 10.1), - Object Planning For Open-Air Facilities Including Drainage Planning (§§ 38 Ff. Hoai In Conjunction With Appendix 11.1), - Specialist Planning For Structural Engineering (§§ 49 Ff. Hoai In Conjunction With Appendix 14.1), - Specialist Planning Of The Technical Equipment (§§ 53 Ff. Hoai In Conjunction With Appendix 15.1), For System Groups 1 - 8, Including Use-Specific Systems (Kitchen) And The Technical Systems In The Outdoor Facilities (Kg 550) - Building Physics, Thermal Insulation And Energy Balancing (§ 3 Para. 1 Hoai In Conjunction With Appendix 1, Paragraph 1.2.1, Paragraph 2, Paragraph 1.2.2, 1.2.3), - Building Physics And Building Acoustics In Accordance With Section 3 Paragraph 1 Hoai I. V. M. Appendix 1, Section 1.2.1 Paragraph 3, Sections 1.2.2, 1.2.4), - Building Physics Room Acoustics In Accordance With Section 3 Paragraph 1 Hoai I. V. M. Appendix 1, Section 1.2.1 Paragraph 4, Sections 1.2.2, 1.2.5), - Fire Protection Services In Accordance With Aho Series No. 17 (As Of 2022) The Plan Is To Create A Construction Design Document And Then Develop A Functional Service Description As The Basis For Commissioning A General Contractor. The Subject Of The Measure Is The Complete Gutting And Renovation Of The Existing Building As Well As The Expansion Of The Melle-Buer Elementary School. Service Phases 1 To 4 - Basic Determination, Preliminary Planning, Draft Planning And Approval Planning With Regard To The Planning Services, All Partial Services Of Service Phases 1 To 4 Must Generally Be Provided. Since The System-Related Types Of Construction For Building Construction Are Not Yet Known, Preliminary Statics Must Be Created With Regard To The Specialist Structural Planning, On The Basis Of Which The General Contractor (Gu) Creates The Statics For His Type Of Construction, Provided That The Type Of Construction Is Left Open. Service Phase 5 - Implementation Planning The Implementation Planning Is Generally Carried Out By The General Contractor Commissioned To Construct The Building. After The Commissioning, The General Contractor (Gu) Creates The Work And Detailed Planning Of All Planning Areas (Structural Engineering, Statics, Hls, Elt, Etc.) To The Requested Or Necessary Extent. In Doing So, He Basically Takes Over The Design And Approval Planning On Which The Commission Is Based And Adapts It To The System He Offers. For This Reason, The Design Should Leave Room For The System-Related Design Differences In Order To Avoid Problems That Cannot Be Solved In This Regard. The General Contractor, As The Work Planner And At The Same Time The Executing Company, Is Fully Responsible For The Structurally Correct And Standard-Compliant Execution. It Is Therefore Not Necessary To Commission The Basic Services Of Service Phase 5 With The Exception Of Updating The Schedule In Accordance With The Service Profile According To Hoai. Instead, A Functional Service Description (Flb), Room Books With Representation And Visuals Are Being Prepared As A Special Service