Tenders Are Invited For Modernization Of The Old Osir Asphalt Pitch At Ul. Moniuszki 10 In Zawiercie

1. The Subject Of The Order Is The Delivery And Installation Of A Modular Sports Surface On The Asphalt Pitch Of The Sports And Recreation Center In Zawiercie At Ul. Moniuszki 10 In Zawiercie, As Part Of The Task Entitled: Modernization Of The Old Asphalth Pitch Of Osir At Ul. Moniuszki 10 In Zawiercie.2.Existing Condition: Cracked Surface. Visible Signs Of Wear. Surface Made Of Asphalt.3.The Scope Of The Order Includes Delivery And Assembly (Including Anchoring, In Accordance With The Manufacturers Recommendations) Of A Modular Polypropylene-Elastomeric Sports Surface With Point Shock Absorbers At The Bottom Of The Surface, Assembled From Ready-Made Modules With Dimensions (±15%) 3000X3000 Mm And A Thickness Of Min. 20Mm, With An Openwork Structure, Installed On The Surface Of An Existing School Playground With Dimensions Of 42M X 22M = 924M2, In Accordance With Annex No. 5 To Swz. All Pavement Layers Should Be Integrated With Each Other. A Surface That Does Not Require The Use Of A Mat That Increases Shock Absorption And Is Installed Between The Base And The Actual Surface. The Colors Of The Modules To Be Determined At The Implementation Stage.4.The Surface Should Ensure: Safety Of Users (Children And Teenagers), Universality Of Use (Basketball, Volleyball, Badminton, Handball, Recreational Tennis), Durability Of The System, Resistance To Weather Conditions, Limited Operating Costs Throughout The Entire Life Cycle Of The Facility.5.Construction Requirements: A) Modular, System, Two-Layer Surface: - Construction Layer Made Of Specialized Impact-Resistant Polypropylene Copolymer (Pp), - Wear Layer (Surface) Made Of Thermoplastic Elastomer (Tpe); B) Integrated System Of Point Elastomer Shock Absorbers Ensuring Controlled Elasticity Of The Surface; C) Openwork Structure, Quickly Draining Water; D) Thickness Total Surface: Min. 20Mm.6.Requirements For Biomechanical Parameters: A) Shock Absorption: Test Performed In Accordance With En 14808 Or Equivalent. Required Value: 30-40%. B) Vertical Deformation: Test Performed In Accordance With En 14809 Or Equivalent. Required Value: 1.5 - 2.3 Mm. C) Ball Bounce: Test Performed In Accordance With En 12235 Or Equivalent. Required Value: Min. 90%D) Slip Resistance: Friction Coefficient Test Performed According To En 13036-4 Or Equivalent (Swinging Device). Required Ptv Value: Dry: 80-110 Wet: 55-1107.Additional Requirements: The Surface Must Have: A Current Pzh Hygiene Certificate Or An Equivalent Document Confirming That The Product Is Safe For The Health Of Users And The Environment, A Test Report Conducted By An Independent, Accredited Laboratory Confirming The Fulfillment Of The Above-Mentioned Requirements. Parameters. Resistance To Uv Radiation. Resistance To Frost (Min. -30°C).8.Operational Requirements: The Surface Should: Enable Year-Round Use, Do Not Require Specialized Maintenance, Enable The Replacement Of Individual Modules Without The Need To Dismantle The Entire Surface, Maintain Technical P