Tenders Are Invited For Reconstruction Of Municipal Road No. 280138W In Pęcław, Stage I

1. The Subject Of The Order Is: The Task Involves The Reconstruction Of Municipal Road No. 280138W In Pęcław (Stage I) On The Section 0+000 - 0+550. It Is Planned To Adjust The Road Width To A Uniform Value Throughout The Entire Road Section (Except For The Required Widenings On Horizontal Curves). The Assumed Width Of The Traffic Lane Was 2.75 M. The Road Axis Was Marked In Relation To The Existing Condition In The Road Lane. It Is Not Planned To Limit The Road With A Concrete Retainer, Except For The Section From The Beginning Of The Development To Km 0+100. The Transverse Inclination Of The Road Is Designed As A Roof Slope Of 2% And One-Sided On Horizontal Curves With Radii Of Less Than 200 M. Along The Road, Two-Sided Shoulders Made Of Crushed Aggregate With A Width Of 0.75 M Have Been Designed. Height Solutionsthe Road Grade Will Be Raised In Relation To The Existing One By Approximately 5 Cm, Which Results From The Adopted Solutions For Strengthening The Surface Structure. Connections With The Existing Surface Should Be Made Smoothly. Existing Exits Should Be Adjusted In Height To The Level Of The New Road Surface. Designed Surface Structures It Is Planned To Strengthen The Surface Structure By Installing A Bituminous Overlay After Corrective Milling Of The Existing Bituminous Layers. The Scope Of Works Related To The Implementation Of The Reinforcement Includes: • Height And Situational Inventory Of The Existing Condition, • Corrective Milling Of The Existing Surface With A Diameter Of 4 Cm Thick, • Local Repairs And Filling Of Gaps, • Cleaning And Sprinkling, • Laying The Geogrid, • Making A Leveling And Binding Layer, • Making A Wearing Course. In Places Where The Replacement Of Through Sections Of Culverts Is Planned, The Existing Surface Is Scheduled For Demolition And A New Structure Should Be Constructed.2.Cpv: 45233120 – 6 3. A Detailed Description Of The Subject Of The Order, As Well As A Description Of The Ordering Partys Requirements In Relation To The Implementation Of The Subject Of The Order And Its Acceptance, Are Specified In The Technical Documentation (Annex No. 10 To The Swz) And The Draft Provisions Of The Contract (Annex No. 9 To The Swz). 4. The Basis For Calculating The Offer Price For The Contractor Should Be His Own Calculation Resulting From The Economic Calculation Based On Technical Knowledge And The Description Of The Subject Of The Order, Including Design Documentation And Stwior. Due To The Method Of Remuneration (Lump Sum), The Bills Of Quantities Constituting An Annex To This Documentation Are Of Auxiliary Nature And Are Used - Together With The Other Elements Of The Swz - To Price The Order By Potential Contractors.5.The Offer Should Be Prepared On The Basis Of The Attached Documentation And Appendices To Swz.6.In Connection With The Entry Into Force Of The Act Of April 16, 2004 On Construction Products (Consolidated Text: Journal Of Laws Of 2021, Item 1213, As Amended), Changes In The Provisions Of The Con