Request For Quotation 03. Spare Parts For The Uaz-31519 Car (Z. 732). The Purchase Is Made On The Basis Of Clauses. 3 Clause 5 Art. 12 Zrk On Public Procurement.

03. Silent Block Springs For Uaz-31519 (Hunter), 2007. Article: 3163-2912020/14-06-011-1. Gost 33671-2015. Certificate. The Purchase Is Made On The Basis Of Clauses. 3 Clause 5 Art. 12 Zrk On Public Procurement., 03. Set Of Radiator Pipes For Uaz-31519 (Hunter), 2007, With Zmz-409 Engine. Material: Five-Layer Silicone Reinforced With Three-Layer Polyester Fabric. Operability At Temperatures From -55 °C To +250 °C. Set Composition: 1) Lower Outlet Pipe (Article: 3163-1303027) - 1 Piece, 2) Upper Inlet Pipe (Article: 31106-1303010) - 1 Piece, 3) Small Straight Branch Pipe (Article: 2765-1303016) - 1 Piece, 4) Straight Pipe With A Diameter Of 20 Mm. - 1 Pc. Gost Iso 4081-2013. Certificate. The Purchase Is Made On The Basis Of Clauses. 3 Clause 5 Art. 12 Zrk On Public Procurement., 03. Cross Rod Silent Block For Uaz-31519 (Hunter) 2007 Model Year. Article 102123832382. Gost 33671-2015. Certificate. The Purchase Is Made On The Basis Of Clauses. 3 Clause 5 Art. 12 Zrk On Public Procurement., 03. Rear Cardan Shaft For Uaz-31519, Gearbox-5. 2007 Assembled With Flange - 1 Pc., Shank (Flange) - 1 Pc. (Installed On Both Sides Of The Cardan) And Crosspieces - 2 Pcs. (Crosspieces Must Be Equipped With Grease Fittings - 2 Pcs. And Retaining Rings - 4 Pcs.). The Driveshaft Is Supplied Assembled, Balanced, With Centered Crosspieces. Article: 31512-2201010-30. Gost 33669-2015. Certificate. The Purchase Is Made On The Basis Of Clauses. 3 Clause 5 Art. 12 Zrk On Public Procurement., 03. Steering Mechanism Assembly With Bipod For Uaz-31519 (Hunter) Car With Power Steering, 2007, With Zmz-409 Engine. Functional Characteristics: Designed To Increase The Torque Generated By The Driver On The Steering Wheel In Order To Turn The Steered Wheels Of The Vehicle Due To The Hydraulic Booster. Qualitative Characteristics: Body Material - Cast Iron. Operational Characteristics: Input Shaft Type - Splined. Technical Characteristics: Maximum Load On The Steered Axle - 1200 Kg; Full Angle Of Rotation Of The Shaft Sector, Not Less Than 80 Degrees. Article: Shnkf.453461.133-50. Certificate. The Purchase Is Made On The Basis Of Clauses. 3 Clause 5 Art. 12 Zrk On Public Procurement.