Request For Quotation Materials For Compressor Maintenance

Technical Specificationname: Air Filter For Retrofitting And Equipping The Main Equipment - Compressor Esk-30D10.The Filter Is Designed To Clean The Incoming Air From Dust, Mechanical Impurities And Contaminants And Must Ensure Reliable Operation Of The Esk-30D10 Compressor.Basic Requirements:Intended For Use In Compressor Equipment Of The Appropriate Type;Compatible With Compressor Esk-30D10;Provides Effective Cleaning Of Intake Air;The Filter Element Must Provide The Required Degree Of Filtration Without Excessive Resistance To Air Flow;The Design And Overall Dimensions Must Correspond To The Standard Compressor Seat;Must Ensure Reliable Operation Under Operating Conditions Of The Compressor;The Filter Must Be New, Not Previously Used;Damage To The Filter Element, Housing, Seals And Fasteners Is Not Allowed;Delivery - In The Manufacturer’S Original Packaging Or Packaging That Ensures The Safety Of The Goods During Transportation And Storage.Compatibility: The Products Offered Must Be Designed For Installation On The Esk-30D10 Compressor. When Offering An Analogue, The Supplier Provides Documentary Evidence Of Compatibility And Compliance With The Technical Parameters Of The Standard Filter.Documents: Passport/Quality Certificate Or Technical Description Of The Manufacturer Indicating The Model, Main Characteristics And Scope Of Application.Quantity:2 Pcs.Delivery Terms: Delivery To The Customers Warehouse At The Expense Of The Supplier. If It Is Discovered That The Product Does Not Meet The Technical Requirements, The Supplier Is Obliged To Replace It At His Own Expense., Technical Specification Gost 1861-73Compressor Oil Is Intended For Completing And Equipping The Main Equipment - The Esk-30D10 Compressor, Ensuring Reliable Lubrication Of Parts And Assemblies, Protection Against Wear And Corrosion, As Well As Stable Operation Under Normal Operating Conditions.Basic Requirements:The Oil Must Be Intended For The Appropriate Type Of Compressor Equipment And Compatible With Esk-30D10;Physical And Chemical Characteristics, Base And Viscosity Class - In Accordance With The Requirements Of The Compressor Manufacturer;Must Have Thermal-Oxidative Stability, Antioxidant, Anti-Wear And Anti-Corrosion Properties;Should Not Form Significant Deposits, Sludge And Soot;The Content Of Water And Mechanical Impurities Is Within The Manufacturer’S Standards;The Oil Must Be New, Not Previously Used, In The Original Sealed Factory Packaging;Reconstituted, Regenerated Or Mixed Oil Is Not Allowed;The Remaining Shelf Life At The Time Of Delivery Is At Least 80% Of That Established By The Manufacturer.Documents: Passport/Quality Certificate, Technical Description, Manufacturer’S Document On The Scope Of Application, Information About The Batch, Production Date And Expiration Date.Packaging And Labeling: Original Manufacturer Packaging Indicating The Name, Manufacturer, Brand/Type Of Oil, Batch Number, Production Date, Expiration Date, Volume And Storage Conditions. Packaging Must Ensure The Safety Of The Goods During Transportation And Storage.Quantity: 20 Liters, 1 Unit Of Packaging.Packing: Factory, According To The Suppliers Proposal.When Supplying Equivalent Oil, The Supplier Must Document Its Compatibility With The Esk-30D10 Compressor And Compliance With The Manufacturers Requirements. Delivery Costs To The Customers Warehouse Are Included In The Price Of The Goods. If A Product Does Not Meet The Requirements, The Supplier Will Replace It At Its Own Expense., Gost 1284.2-89 Technical Specificationname: V-Belt B-1800 For Retrofitting And Equipping The Main Equipment - Compressor **Esk-30D10***Key Features:** Type: Drive V-Belt Of Normal Section;* Profile: B (B);* Design Length: 1800 Mm;* Design Width: 14 Mm;* Width Of Larger Base: 17 Mm;* Height: 11 Mm;* Wedge Angle: 40° ± 1°;* The Belt Must Be Endless, Rubber-Fabric, Designed To Transmit Torque In The Drive Of Compressor Equipment;* Must Ensure Reliable Operation Under Normal Operating Conditions Of The Compressor;* New, Never Used, Without Cracks, Delaminations, Tears, Swelling Or Other Damage;* Must Comply With The Dimensions And Technical Requirements Of Gost 1284.1-89 And Gost 1284.2-89;* Must Be Compatible With Compressor Drive Esk-30D10quality And Documents: Upon Delivery, A Passport/Quality Certificate Or Other Manufacturer’S Document Is Provided Confirming The Belt’S Compliance With The Established Requirements.Packaging: Original Packaging Or Packaging That Ensures The Safety Of The Product During Transportation And Storage.Quantity: 2 Pcs.Delivery Terms: Delivery To The Customers Warehouse At The Expense Of The Supplier. If A Product Does Not Comply With Technical Requirements, The Supplier Is Obliged To Replace The Product At Its Own Expense., Technical Specificationname: Oil Separator (Filter Separator) For Retrofitting And Equipping The Main Equipment - Compressor *Esk-30D10*.The Oil Separator Is Designed To Separate Oil From Compressed Air And Return The Separated Oil To The Compressor Oil Circuit.Basic Requirements:* Intended For Use In Compressor Equipment Of The Appropriate Type;* Compatible With Compressor **Esk-30D10**;* Provides Effective Separation Of Oil Aerosol From Compressed Air;* Provides The Necessary Degree Of Air Purification And Minimum Residual Oil Content In Accordance With The Requirements Of The Compressor Manufacturer;* Filter Material Is Resistant To Compressor Oil, Temperature And Operating Pressure;* Design, Overall And Connecting Dimensions Must Correspond To The Standard Installation Location Of The Compressor;* Seals Must Be Resistant To Compressor Oil And Operating Temperature;* Must Ensure Reliable Operation Under Normal Operating Conditions Of The Compressor;* The Product Must Be New, Previously Unused, Without Damage;* Delivery - In Original Packaging, Ensuring Safety During Transportation And Storage.Compatibility: The Separator Must Be Designed For Installation On The Esk-30D10 Compressor. When Offering An Equivalent, The Supplier Provides Documentary Evidence Of Compatibility, Sizing And Technical Characteristics Of The Standard Product.Documents: Passport/Quality Certificate Or Technical Description Of The Manufacturer Indicating The Model, Main Characteristics, Scope Of Application And Catalog Number.Quantity:2 Pcs.Delivery Terms: Delivery To The Customers Warehouse At The Expense Of The Supplier. If A Product Does Not Comply With The Requirements Of The Technical Specification, The Supplier Is Obliged To Replace The Product At His Own Expense., Name: “Oil Filter, For Air Compressor.”Technical Specificationname: Oil Filter For Retrofitting And Equipping The Main Equipment - Compressor Esk-30D10.Basic Requirements:Designed For Use In The Lubrication System Of An Air Compressor;Compatible With Compressor Esk-30D10;Ensures Effective Cleaning Of Compressor Oil From Mechanical Impurities And Contaminants;Provides The Required Degree Of Filtration Without An Unacceptable Decrease In Oil Pressure;The Filter Element Must Be Resistant To Compressor Oil And Operating Temperature;The Design, Connecting Dimensions And Seals Must Correspond To The Standard Installation Location On The Compressor;The Filter Must Ensure Reliable Operation Under Normal Operating Conditions;New, Never Used, Without Damage To The Housing, Filter Element And Seals;Delivery In Original Or Other Sealed Packaging To Ensure Safety During Transportation And Storage.Compatibility: The Filter Must Be Designed For Installation On The Esk-30D10 Compressor. When Offering An Analogue, The Supplier Provides Documentary Evidence Of Compatibility And Compliance With The Technical Parameters Of The Standard Filter.Documents: Passport/Quality Certificate Or Technical Description Of The Manufacturer Indicating The Model, Main Characteristics And Scope Of Application.Quantity: 2 Pcs.Delivery Terms: Delivery To The Customers Warehouse At The Expense Of The Supplier. If A Product Does Not Comply With The Requirements Of The Technical Specification, The Supplier Is Obliged To Replace The Product At Its Own Expense.