Request For Quotation Electric Storage Water Heater 100 Liters

Electric Storage Water Heater 100 L, Internal Tank Volume: Not Less Than 100 Liters. Inner Tank Material: High-Quality Stainless Steel (Provides Corrosion Protection And Long Service Life) Thickness Of At Least 1.2 Mm. Rated Power: Not Less Than 2000 W (2.0 Kw).Type Of Heating Element (Heating Element): Tubular Electric Heater Of Immersion (“Wet”) Type. Maximum Water Heating Temperature: Not Less Than 75 °C. Maximum Operating Pressure: Not Less Than 7.0 Bar (0.7 Mpa). Thermal Insulation Of The Body: The Presence Of Polyurethane Foam Insulation With A Thickness Of At Least 20 Mm (To Minimize Heat Loss And Reduce Energy Consumption). Power Supply: Standard Single-Phase Network 220–230 V / 50 Hz. Installation Method: Vertical, Wall.Body Shape: Cylindrical/Round. Pipe Connection Type: Bottom.Control Type: Mechanical (Via A Thermostat On The Body).Corrosion Protection: The Presence Of A Built-In, Replaceable Magnesium Anode For Additional Electrochemical Protection Of The Tank And Heating Element From Scale.Degree Of Dust And Moisture Protection: At Least Ipx4 (Protection From Water Splashes From Any Direction). Mandatory Presence Of A Residual Current Device (Rcd) On The Power Cord To Protect Users From Electric Shock In The Event Of A Leak. Overall Dimensions: Height: No More Than 93 Cm, Width: No More Than 45 Cm, Weight Without Water Not Less Than 16 Kilograms 500 Grams Delivery Set: Storage Water Heater Assembly 1 Pc.Safety (Check) Valve (To Relieve Excess Pressure) 1 Pc.Operating Manual / Product Passport With Warranty Card 1 Pc.Gost Iec 60335-2-21-2014