Request For Quotation Purchase Of Household Goods - Thermal Imager, Sun Protection Mirror Film, Astana - Goods Will Be Accepted Strictly !

Solar Control Mirror Film For Internal Application On Glass Surfaces, Designed To Reduce The Intensity Of Solar Radiation, Prevent Overheating Of Rooms, Protect Against Ultraviolet Radiation And Increase Visual Privacy. Fabric Width - 1.52 M, Roll Length - No Less Than 30 M, Total Thickness - No Less Than 56 Microns (2 Mil), Light Transmission - No More Than 8%, Solar Energy Delay - No Less Than 82%, Degree Of Ultraviolet Radiation Blocking - No Less Than 99%. Operating Temperature Range - From −40 °C To +80 °C. The Film Must Have A Multilayer Structure Based On A Polymer Material With A Metallized Reflective Layer, A Protective Coating Against Mechanical Damage And An Adhesive Layer For Reliable Fixation On The Glass; Construction - At Least 2 Layers. Color - Silver, With A Pronounced Mirror Effect. The Adhesive Layer Must Ensure Uniform Adhesion Of The Material To The Glass Without Peeling, Formation Of Bubbles And Visual Distortions, Subject To The Installation Technology. The Surface Of The Film Must Be Resistant To Moisture, Detergents And Operational Mechanical Stress. The Material Should Reduce The Penetration Of Solar Heat Into The Room, Reduce The Fading Of Interior Decoration And Furniture Under The Influence Of Uv Radiation. The Film Must Be Suitable For Installation On Window Glass And Double-Glazed Windows Without Dismantling The Structures, Supplied In Factory-Made Rolls, Without Folds, Tears, Scratches, Clouding Or Other Manufacturing Defects., Portable Thermal Imager For Non-Contact Temperature Measurement And Thermal Imaging Inspection Of Electrical Equipment, Engineering Systems, Buildings And Equipment. Infrared Resolution – No Less Than 256×192 Pixels; Temperature Measurement Range - From −20 To +550 °C; Accuracy - ±2 °C Or ±2%; Measurement Resolution - 0.1 °C; Response Time - No More Than 500 Ms; Thermal Sensitivity - No More Than 60 Mk; Frame Rate - At Least 25 Hz; Field Of View - At Least 56°×42°; Spectral Range - 8–14 Μm; Adjustable Emissivity - 0.01–1.00. Tft Lcd Display 2.8, Resolution Of At Least 320×240 Pixels. Fusion And Pip Modes Are Provided, At Least 7 Color Palettes, Digital Camera At Least 640×480 Pixels, Temperature Measurement At The Central Point And Selected Area, Automatic Detection Of Maximum Temperature, Light/Sound Indication Of Exceeding A Specified Value. Saving Images To A Micro Sd Card Up To 32 Gb, Data Transfer Via Usb Type-C, Real-Time Image Transmission, Analysis Software On A Pc. Power Supply - Built-In 3.6 V Lithium-Ion Battery, 5000 Mah; Battery Life - At Least 6 Hours; Built-In Led Flashlight; Degree Of Protection - Not Lower Than Ip65; Fall Protection - At Least 2 M; Operating Temperature - 0...+50 °C; Weight - No More Than 490 G. Set: Thermal Imager, Micro Sd Card, Usb Type-C Cable, User Manual., Autonomous Aerosol Fire Extinguishing Installation With An Automatic Thermal Activator, Designed For Local Extinguishing Of Fires In Electrical Panels, Distribution Cabinets, Automation Cabinets, Electrical Equipment And Other Closed Spaces. The Installation Must Operate Autonomously, Without Connection To An External Power Source. A Solid-Phase Fire Extinguishing Aerosol Must Be Used As A Fire Extinguishing Agent. Product Weight - 0.1 Kg. The Design Must Allow For Mounting On A Standard Din Rail. Automatic Activation Should Be Carried Out By A Temperature-Sensitive Element When The Temperature Reaches About 160–180 °C. The Startup Time After Reaching The Response Temperature Is No More Than 5 Seconds. The Installation Must Ensure The Formation Of A Fire Extinguishing Aerosol Directly In The Protected Area And Extinguish The Fire Without The Use Of Water, Foam Or Powder. The Operating Temperature Range Is No Longer From −50 To +90 °C. The Installation Must Be Intended For Use In Electrical Installations And Electrical Cabinets, Including The Presence Of Electrical Equipment. Service Life - At Least 10 Years. The Design Should Provide Compact Placement Inside The Electrical Cabinet And The Ability To Quickly Mount On A Din Rail. The Product Must Be New, Unused, Supplied In Original Packaging And Have Operational Documentation And Documents Confirming Compliance With Fire Safety Requirements. Equipment: Autonomous Aerosol Fire Extinguishing Installation, Thermal Activator And Fastening Elements For Installation On A Din Rail.