Tenders Are Invited For Rdw In Parczew: Renovation Of Provincial Road No. 813 On The Section From Km 27+900 To Km 28+765

The Subject Of The Order Is: Renovation Of Provincial Road No. 813 On The Section From Km 27+900 To Km 28+765, 0.865 Km Long In The Town Of Komarówka Podlaska. The Scope Of Works Includes, Among Others: A) Carrying Out Measurement Works For Linear Earthworks, Including Preparing An As-Built Surveying Inventory; B) Corrective Milling Of The Bituminous Surface; C) Construction Of A Trough Under The Technological Band, D) Manual Profiling And Compaction Of The Subsoil For Construction Layers; E) Construction Of A Concrete Base Without Expansion Joints Under The Technological Band - Layer Thickness After Compaction 30 Cm; F) Making A Technological Strip From A Mineral-Bituminous-Clinical-Gravel Mixture With An Asphalt Binder - Layer Thickness After Compaction: 10 Cm; G) Performing Mechanical Cleaning And Sprinkling Of Cold Asphalt Emulsion On The Base And Bituminous Surface; H) Leveling The Existing Foundation With A Mineral And Asphalt Mixture; I) Creating An Anti-Cracking Layer Under The Bituminous Layers With Reinforcing Mesh; J) Making A Binding Layer Of Mineral And Bituminous Grit Mixtures, Thickness After Compaction: 5 Cm; K) Making A Wearing Course Of Mineral-Bituminous Grit Mixtures, Thickness After Compaction: 4 Cm; L) Strengthening The Roadsides With Crushed Stone, 10 Cm Thick After Compaction; M) Rearranging Signs Or Signposts On The Post And Hectometer Signs. N) Execution Of Thick-Layer Horizontal Markings. The Detailed Scope Of Works Is Included In The Executive Design, Temporary And Permanent Traffic Organization Design, Detailed Technical Specifications And In The Bill Of Quantities Constituting An Auxiliary Part Of Determining The Quantity Of Works. Design Documentation Adapts The Facility To The Needs Of All Users, Including Accessibility For Disabled People. As A Public Facility, After Construction Is Completed, It Will Not Have Any Restrictions On Accessibility By All Road Users, Including Disabled People, Which Is Required By Regulations Regarding Requirements, Among Others. For The Technical Conditions That Public Roads And Road Engineering Structures Should Meet (Journal Of Laws Of 2022, Item 1518). The Bill Of Quantities Is Of An Auxiliary Nature. Before Submitting An Offer, The Contractor Is Obliged To Carefully Check The Quantity Of Works Against The Design Documentation. Due To The Fact That The Works Contract Is A Lump Sum Contract, If A Larger Number Of Works Occur In Any Item During The Works, They Cannot Be Considered Additional Works Requiring Additional Remuneration. The Possible Absence Of Certain Works Necessary To Be Performed On The Basis Of The Design Documentation In The Bill Of Quantities Or In The Bid Cost Estimate Template Does Not Release The Contractor From The Obligation To Perform Them On The Basis Of The Design Documentation At The Contract Price. The Contractor Has The Right To Adjust The Quantity Of Works In The Bill Of Quantities And The Bid Cost Estimate Template According To His Own Calculations Base