Request For Quotation Purchase Of Repair Components For Fixed Assets

Electric Burner 3000 W When Assembled. Intended As Built-In Components In Electric Stoves. An Electric Burner Contains A Cast Iron Plate, An Inner Lid Installed On It With A Layer Of Thermal Insulation Laid On It, An Outer Cover, And Tubular Electric Heaters Placed Between The Stove And The Inner Cover. The Cast Iron Surface Is Heated By Two Heating Elements With A Power Of 1.4 And 1.6 Kw, Which Are Pressed Tightly Against The Inner Surface Of The Cast Iron Plate. Suitable For Installation On Slabs Produced By: Tulatorgtekhnika: Pe-0.24; Pe-0.48; Pe-0.72; Tulatekhmash: Pezhsh; Chuvashtorgtekhnika: Ep-6Zhsh; Ep-4Zhsh; Ep-6P; Tvertorgtekhnika-Pesm-4; Gomeltorgmash-Pem-4-010; Pem-2-020; Epk-48; Pejsh; Food Technologies: Pep-0.48; Pep-0.72. Specifications: Type: Burner Assembled; Number Of Products In The Set – 1; Width - 295 Mm; Height - 30 Mm; Length - 417 Mm; Nominal Working Surface Area: 0.12 M2; Voltage 220 V; Power 3 Kw; Heating Element: Heating Elements; Number Of Heating Elements: 2 Pcs. Outputs From Heating Elements – 4 Pieces. Terminal Position: Bottom. Operating Heating Modes: “Weak”, “Medium”, “Strong”., Switch For Industrial Electric Stoves Ppkp-25A Vrei685119001. Switch Ppkp-25A (Vrei685119001, Tpkp-25A) Is Made Of Aluminum And Phenolic Plastic. The Ppkp-25A Rotary Switch Is Designed For Manually Switching The Power Of Kitchen Stoves By Changing The Switching Circuit Of The Heating Elements. The Switch Has Four Fixed Positions: — Zero — The Load Is Turned Off (All Contacts Are Open); - First - Sequential Connection Of Two Electrical Load Circuits Through Contacts 1-3 And 2-4; - Second - Turning On One Electrical Load Circuit Through Contacts 1-3 And 2-5; - Third - Parallel Connection Of Two Electrical Load Circuits Through Contacts 1-3, 1-4 And 2-5 Suitable For Electric Stoves Ep, Pem, Epk, Abat, Iterma, For Ovens Of The Shzhe Series, For Production Equipment: Gomeltorgmash Stoves Pem-4-010, Pem-2-020, Epk-48, Pezhsh; Prommash Pet-0.51 Pet-0.34; Food Technologies Pep-0.48M-Dsh Pep-0.48M-Dsh-N Pep-0.72M-Dsh Pep-0.72M-Dsh-N; Tvertorgtekhnika; Tulatekhmash Pezhsh; Tulatorgtekhnika Pe-0.24, Pe-0.48, Pe-0.72; Chuvashtorgtekhnika Ep-6Zhsh, Ep-4Zhsh, Ep-6P. The Item Comes Complete With A Small Handle And Mounting Materials. Technical Characteristics: Weight: 295G; Maximum Current - 25A; Country Of Origin: Republic Of Belarus; Material – Aluminum; Dimensions (Wxhxd) - 101 X 116 X 84 Mm; Voltage - 220±10%; Rod Length - 37 Mm; Heat Resistance: Up To 125°C., The Sealing Profile 23-111-60 Is Used To Seal The Oven Doors Shzhe, Ep, Esh Produced By Abat. Sealing Heat-Resistant Rubber, Which Is Used For Doors Of Ovens, Stoves And Ovens Produced By Abat. The Abat Seal Operates At A Temperature Of 270°C, But Can Also Withstand Up To 300°C For A Short Time. Technical Characteristics: T-D-Shaped Profile; Material: Heat-Resistant Rubber; Length Per Section: 1.4-1.5 M., Rkgm Wire Is Heat-Resistant With One Stranded Copper Core, Insulated With Silicone Rubber And Fiberglass Braided With Enamel Or Heat-Resistant Varnish. Designed For A Maximum Ac Voltage Of 660 V At A Frequency Not Exceeding 400 Hz; Operation On Dc Networks Is Permissible, Where The Highest Voltage Can Be Increased To 1000 V. Technical Characteristics: Number Of Cores: 1; Armored: No; Insulation: Silicone Rubber; Conductor Material: Copper; Purpose: Power Wires For Electrical Installations; Outer Diameter Of Cable, Mm: 5.4; Non-Flammability: Yes; Shell: Fiberglass Impregnated With Heat-Resistant Varnish; Cable Cross-Section, Mm2: 4; Shielded: No., Gm Copper Cable Connecting Sleeves, Secured By Crimping, Are Designed For End-To-End Connection Of Wires And Cables With Copper Conductors With A Cross-Section Of 16 Mm. Used For Cables With Voltages Up To 10 Kv. Technical Characteristics: Material: Copper; Cross-Sectional Area: 16 Mm2. Technical Characteristics: T-D-Shaped Profile; Material: Heat-Resistant Rubber; Length Per Section: 1.4-1.5 M.