Tenders Are Invited For Construction Of A Warehouse - Olioc. Stage 1

The Subject Of The Order In Stage 1 Is The Construction Of A Complete Shell Of A Closed Facility, Including Underfloor Installations And An External Water Supply Connection. The Scope Of Works Divided Into Industries Includes: 1. General Construction And Construction Industry• Earthworks And Preparatory Works: Full Surveying Services For Investments; Mechanical Excavation In The Ground And Removal Of Excavated Material; Backfilling And Mechanical Compaction Of Embankments With Rammers.• Foundations: Construction Of Lean Concrete Sleepers; Construction Of Reinforced Concrete Footings.• Foundation Walls: Erecting Reinforced Concrete Walls 24 Cm Thick; Execution Of Vertical (Bituminous) Moisture Insulation With Rounding Of The Facets; Insulating The Walls With 60 Mm Thick Xps Polystyrene Boards And Finishing The Plinth With Mosaic Plaster.• Steel Structure: Installation Of A Single-Nave, Post-Truss Lattice Structure Of The Hall, With Factory Anti-Corrosion Protection.• Warehouse Floor: Construction Of The Substructure From Compacted Loose Materials And Lean Concrete; Laying Double Insulation Made Of Pe Foil And Thermal Insulation Made Of Styrofoam; Pouring Of A Smoothly Troweled Reinforced Industrial Floor And Its Impregnation.• Roof And Wall Cladding: O Roof: Installation Of A Covering Made Of Sandwich Panels With A Complete System Of Gutters And Downpipes Made Of Galvanized Coated Sheet Metal. O Walls: Installation Of A Light Cladding Made Of Wall Sandwich Panels Along With Flashings And Drip Caps.• Joinery: Installation Of 5 Pieces Of Pvc Windows With A Total Surface; Assembly 1 Set Steel External Doors; Assembly 3 Sets Sectional/Tilting Gates.• Internal Elements: Delivery And Installation Of Steel Internal Stairs And Installation Of 5 Pieces Of Pvc Window Sills.2. Installation Industry (Sanitary)• External Water Supply Connection: Construction Of A Water Supply Connection Using Pe Pressure Pipes; Installation Of Fittings (Pe Fittings, Drill Hole With Integrated Gate Valve); Conducting Tightness Tests, Disinfection And Rinsing Of The Network; Marking The Route With Blue Tape In The Ground And With Signs On The Wall; Construction Of 3 Pipeline Passages Through The Walls In 160 Mm Protective Pipes. • Underfloor Sewerage (Internal): Distribution Of Pvc Sewage Pipes With A Diameter And Fittings Under The Floor Of The Hall; Installation Of 1 Pc. Floor Drain Dn100; Making A Tight Passage Through The Wall With A 200 Mm Pipe And Leading A Vertical Exhaust Chimney Above The Roof (Prepared For Connecting The Installation In Stage Ii).