Tenders Are Invited For Installation Of Lighting Lamps Along The Nowa Wieś Municipal Road

Construction Of A Section Of The Overhead Street Lighting Network Of A Municipal Road, Powered By The Existing Pole No. 146/5, With An Asxsn 2X25 Mm2 Cable, Suspended On 6 Spun Poles, 10.5 M High, Placed Directly In The Ground With Footing Plates, With A Network Length Of Approx. 175 M. Next To The Pole No. 146/5, An Sou Lighting Cabinet Should Be Built, Powered Yakxs 4X35 Mm2 Cable Line, Via Ssp-1 Pole Connector. Earthing Should Be Performed On Pole 146/5 And On The Last Lighting Pole (No. 6/Wo). Install A Portable Earthing Kit On The Last Pole. Instead Of An Astronomical Clock, A Nema Controller Should Be Installed In The Sou Box. Led Luminaires With A Luminous Flux Of Min. 6030 Lm, Mounted On Wo-1 Tubular Booms. Two-Chamber Led Road Luminaires With Factory-Installed Nema 5/7 Pin Sockets And Lighting Controllers. The Marking Of The Poles Should Be Agreed With The Investor. The Lighting Control Must Be Compatible With The Existing System Used In The Kolbuszowa Commune. The Existing System Is Maintained By Isc Sp. Z O. O., Ul. Krakowska 140A, 34-120 Andrychów. The Lighting Is A Continuation Of The Existing Lighting, Therefore The Luminaires Should Be Matched In Shape To The Existing Ones. The Task Should Be Submitted For Acceptance To Pge Dystrybucja Rejon Energetyczny Mielec And Completed With Positive Acceptance. Minimum Requirements For Led Luminaires.1) Two-Chamber Housing Made Of Die-Cast Aluminum, Tempered Glass With A Self-Cleaning, Scratch-Resistant Coating2) Powder-Coated Body With Electrostatic Coating,3) The Luminaire Is Made In Class Ii Anti-Shock Protection,4) The Luminaire And Accessories Chamber Is Ip 66 Tight, Must Include A Pressure Equalizing Filter, 5) Impact Resistance - Ik 08.6) Color Temperature Of The Diodes Used In The Range Of 3800K - 4200K,7) Power Supply System Of The Luminaire Enabling Control Of An Analog Signal 0 -10 V,8) Power (Flux) Reduction Must Be Carried Out Smoothly By Reducing The Luminous Flux Of All Led Sources Simultaneously And Not By Turning Off Individual Led Panels In One Luminaire,9) Luminous Efficiency Of The Luminaire (Taking Into Account All Losses) Min. 170 Lm/W,10) Power Factor (Cos Φ)≥0.98 For The Rated Power, Maintaining The Power Factor Cos Φ Above 0.96 When Controlling The Luminaire In The Range Of 20-100% Of The Rated Power,11) Surge Resistance Of The Luminaire: 10 Kv.12) The Luminaires Hook Should Be An Integral Part Of The Luminaire And Be Able To Be Mounted Directly On Lighting Poles Without Additional Adapter, Tilt Angle Adjustment In The Range Of -150 To +150, In Steps Of 50 13) The Luminaire Is Equipped With A Factory-Installed Nema 5/7Pin Socket, 14) It Has Valid Certificates: Ce, Rohs, Enec, Enec+15) Warranty Min. 5 Years (60 Months) From The Date Of Acceptance Of The Works. Note: If The Swz Or Annexes To The Swz, Including Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, Would Indicate Trademarks, Origins, Technical Approval Standards, Pate