Tenders Are Invited For Delivery Of Wood - Part Ii - Impregnated Sawn Timber And Square Timber, Narrow Gauge Sleepers

1. Subject Of The Order.1.1. The Subject Of The Order Is The Supply Of Wood - Coniferous Sawn Timber, Square Timber, Narrow Gauge Sleepers And Boards, Hereinafter Referred To As The Subject Of The Order.1.2. A Detailed Description, Requirements And Quantities Are Included In The Table Below: No. Name Maximum Quantity Units/M1) Impregnated 25Mm Thick Class I Sawn Timber Meeting The Quality Requirements Contained In The Pn-D-96000 Standard Or In Accordance With Equivalent Solutions Contained In Point 3.3 (Length 5M) 10 M³2) Impregnated 32Mm Thick Class I Sawn Timber Meeting The Quality Requirements Contained In The Pn-D-96000 Standard Or In Accordance With Equivalent Solutions Contained In Point 3.3 (5 M Long) 130 M³3) Impregnated Timber, 50 Mm Thick, Class I, Meeting The Quality Requirements Set Out In The Pn-D-96000 Standard Or According To Equivalent Solutions Included In Point 3.3 (5 M Long) 90 M³4) Impregnated Edged Timber, Dimensions 200 Mm X 200 Mm, Meeting The Quality Requirements Set Out In The Standard Pn-D-96000 Or According To The Equivalent Solutions Contained In Point 3.3 10 M³5) Impregnated Edged Wood, Dimensions 100 M M X 100 Mm Meeting The Quality Requirements Contained In The Pn-D-96000 Standard Or According To The Equivalent Solutions Contained In Point 3.3 32 M³6) Impregnated Timber, 25 Mm Thick, Class Ii, Length 1250 Mm, Width In The Range Of 100 Mm-250 Mm, Meeting The Quality Requirements Contained In The Pn-D-96000 Standard Or According To Equivalent Solutions Contained In Point 3.3 15 M³7) Narrow-Gauge Sleepers Dimensions 1250Mm X 160Mm X 125Mm 20 M³8) Lining, Planed And Rabbeted Coniferous Boards With Overlap (Thickness: 25-40Mm X Length 1.0 - 3.0 M And Width Min. 80Mm) 13 M²1.3. The Ordering Party Will Consider The Following Solutions To Be Equivalent: 1) General-Purpose Coniferous Lumber - Class I: A) Parallel Edged; B) Wood Moisture: Not More Than 22%; C) Protected Against Blue Stain; D) Dimensions Of Edged Boards And Logs: Thickness: 25, 32, 50 Mm; E) Colors: - Blue Stain - Unacceptable; - Brown Algae And Similar Color Changes - Unacceptable; - Graying - Acceptable, Disappearing When Planing; F) Rot: Hard And Soft - Unacceptable; G) Insect Carpets: Small And Large - Unacceptable; H) Straight Cracks Not Extending On Planes - Unacceptable Above 1 Mm, Permissible In The Middle Strip Covering Up To 1/2 Of The Width Of The Piece With A Total Length Not Exceeding ¼ And With A Depth Not Exceeding 1/4 Of The Thickness Of The Piece;I) Diagonal Cracks That Do Not Extend On Planes - Not Permissible;J) One-Sided Frontal Cracks - Permissible With A Total Length Of Up To 1/5 Of The Length Of The Piece And Up To A Depth Of Up To 1/5 Of The Thickness Of The Piece;K) Bilateral Frontal Cracks - Permissible In The Middle Strip Occupying Up To 1/2 Of The Width Of The Piece With A Total Length Not Greater Than The Width Of The Piece;L) Circular And Arc Cracks - Unacceptable;2) General-Purpose Coniferous Lumber - Class Ii: A) Edged In Parall