Request For Quotation Work On The Manufacture And Installation Of Blinds And Roller Blinds

Production And Installation Of Roller Blinds In The Surgery Department (Office Room) On Two Windows. Before Production Begins, The Supplier Is Obliged To Carry Out Control Measurements Of Windows At The Customer’S Site. The Color And Texture Of The Fabric Are Determined By Agreement With The Customer After Providing Samples. Blackout Roller Blinds. All Components (Fabric, Shaft, Control Mechanism, Brackets, Weights And Fasteners) Required For Complete Installation Are Provided By The Supplier And Are Included In The Total Price. Each Window Has Three Sections. The Size Of Each Window: Height 170 Cm, Width 225 Cm. Roller Blinds Are Installed Separately On Each Section Of Windows. The Final Dimensions Of Each Roller Blind Are Determined By The Supplier Based On The Results Of Control Measurements At The Customer’S Site., Manufacturing And Installation Of Vertical Fabric Blinds In The Surgery Department. Blinds Must Be New, Not Previously Used, Made Of High-Quality Materials, Without Defects, Damage Or Visible Defects. The Design Of The Blinds Should Provide Regulation Of The Intensity Of Natural Light And The Ability To Completely Close The Window Opening. Blinds Must Consist Of Vertical Fabric Slats, An Upper Cornice (Profile) And A Control Mechanism. The Width Of The Lamellas Is At Least 89 Mm. The Fabric Must Be Dense, Wear-Resistant, Resistant To Fading And Suitable For Use In The Premises Of A Medical Institution. The Color And Texture Of The Fabric Are Determined By Agreement With The Customer Based On The Samples Provided By The Supplier Before Production Begins. Before Production Begins, The Supplier Is Obliged To Carry Out Control Measurements Of Windows Directly At The Customer’S Site. The Production Of Blinds Must Be Carried Out Strictly According To The Actual Dimensions Of The Windows, Taking Into Account The Characteristics Of The Window Openings And The Installation Location. The Design Should Provide For The Possibility Of Rotating The Vertical Slats And Moving Them To The Side To Regulate The Degree Of Illumination Of The Room. The Control Mechanism Must Ensure Smooth And Reliable Opening, Closing And Rotation Of The Slats. The Supplier Is Obliged To Provide All Materials And Components Necessary For The Complete Installation And Operation Of The Blinds, Including Vertical Fabric Slats, Top Cornice (Profile), Control Mechanism, Control Chain Or Cord Depending On The Design, Sliders, Holders, Brackets, Clamps And Fasteners. All Components Must Be Compatible With Each Other And Match The Design Of The Blinds. The Total Number Of Blinds Is For 15 Windows. The Width Of Each Window Is 2.5 Meters And The Height Of Each Window Is 150 Cm., Production And Installation Of Roller Blinds (Roller Blinds) In The Department Of Traumatology And Orthopedics. Before Production Begins, The Supplier Is Obliged To Carry Out Control Measurements Of Windows Directly At The Customer’S Site. The Color And Texture Of The Fabric Are Determined By Agreement With The Customer After The Supplier Provides Fabric Samples. Roller Blinds Should Be Of The “Blackout” Type, Providing Maximum Darkening Of The Room And Protection From Sunlight. Roller Blinds Must Be Installed Separately On Each Section Of The Window. The Supplier Is Obliged To Provide All Materials And Components Necessary For The Complete And High-Quality Installation And Operation Of Roller Blinds, Including Fabric, Shaft, Control Mechanism, Brackets, Weights (If Present In The Structure) And Fasteners. All Materials And Components Must Be New, Not Previously Used, Without Defects Or Mechanical Damage. The Cost Of All Necessary Materials, Components, Delivery, Manufacturing And Installation Is Included In The Total Cost And Is Not Subject To Additional Payment By The Customer. Total Quantity – 3 Three-Section Windows. The Height Of Each Window Is 170Cm. The Width Of Each Window Is 225 Cm. The Final Dimensions Are Determined By The Supplier Based On The Results Of Control Measurements At The Customer’S Site., Manufacturing And Installation Of Vertical Fabric Blinds In The Department Of Traumatology And Orthopedics. Blinds Must Be New, Not Previously Used, Made Of High-Quality Materials, Without Defects, Damage Or Visible Defects. The Design Of The Blinds Should Provide Regulation Of The Intensity Of Natural Light And The Ability To Completely Close The Window Opening. Blinds Must Consist Of Vertical Fabric Slats, An Upper Cornice (Profile) And A Control Mechanism. The Width Of The Lamellas Is At Least 89 Mm. The Fabric Must Be Dense, Wear-Resistant, Resistant To Fading And Suitable For Use In The Premises Of A Medical Institution. The Color And Texture Of The Fabric Are Determined By Agreement With The Customer Based On The Samples Provided By The Supplier Before Production Begins. Before Production Begins, The Supplier Is Obliged To Carry Out Control Measurements Of Windows Directly At The Customer’S Site. The Production Of Blinds Must Be Carried Out Strictly According To The Actual Dimensions Of The Windows, Taking Into Account The Characteristics Of The Window Openings And The Installation Location. The Design Should Provide For The Possibility Of Rotating The Vertical Slats And Moving Them To The Side To Regulate The Degree Of Illumination Of The Room. The Control Mechanism Must Ensure Smooth And Reliable Opening, Closing And Rotation Of The Slats. The Supplier Is Obliged To Provide All Materials And Components Necessary For The Complete Installation And Operation Of The Blinds, Including Vertical Fabric Slats, Top Cornice (Profile), Control Mechanism, Control Chain Or Cord Depending On The Design, Sliders, Holders, Brackets, Clamps And Fasteners. All Components Must Be Compatible With Each Other And Match The Design Of The Blinds. The Total Number Of Blinds Is For 16 Windows. The Width Of Each Window Is 2.5 Meters And The Height Of Each Window Is 150 Cm.