Tenders Are Invited For Medical Equipments - Purchase Of Endoprostheses According To The Needs Of The Imsp Sfânta Treime Clinical Hospital For The Year 2026

Medical Equipments - Purchase Of Endoprostheses According To The Needs Of The Imsp Sfânta Treime Clinical Hospital For The Year 2026. The Lot Includes 6 Positions: 1.1 - The Cemented Femoral Component The Cemented Femoral Component -To Be Made Of Co-Cr Alloy, Cemented -Left/Right Variants -To Present The Anti-Rotational Femoral Fixation Augmented By Two Pins And A Special Texture For A Good Fixation Of The Cement -Posterior Intercondylar Opening To Allow The Implantation Of Centromedullary Rods -Design To Allow Flexion Of At Least 130° -Variant With Posterostabilization -Posterior Femoral Condyles To Be Thickened To Increase Stability And Avoid Subluxation -To Present Congruence Between The Radius Of The Femoral Condyles And The Tibial Insert -An Accentuated Prepatellar Ridge For Good Patella-Femur Contact And Reduction Of Stress On The Patella -To Reproduce The Native Anthropo-Posterior Distances With At Least 18 Profiles -At Least 10 Dimensions For Each Limb -The Articular Surface Must Be Polished -The Implantation Surface Must Be Rough - Remaining Period Of Sterilization Not Less Than 3 Years At The Time Of Delivery Unit Of Measurement: Piece; Quantity: 100.00. 1.2 – Tibial Component Tibial Component -To Be Made Of Titanium Alloy -To Respect The Anatomical Shape Of The Tibia, With Left/Right Variations -Implantation Base By Stabilization Pin With 2 Lateral Fins Intended To Increase Resistance And Rotational Stabilization -The Tibial Component To Present The Possibility Of Overstabilization By Attaching Extension Rods, Depending On Intraoperative Needs -The Tibial Plateau Profile To Be Asymmetrical -To Present Modularity, Usual Tibia Dimensions Must Be Compatible With At Least 3 Femur Dimensions -Peripheral Clamping System Of The Polyethylene Insert -Dimensions: Minimum 10 In Total For Each Individual Limb -To Present A Distal Threaded Plug For Fixing The Extension Rod -Remaining Term Of Sterilization No Less Than 3 Years At The Time Of Delivery Unit Of Measurement: Piece; Quantity: 100.00. 1.3 – Tibial Insert Tibial Insert -To Be Made Of Uhmwpe Polyethylene -To Have The Anterior Tibial Edge Inclined To Avoid Impingement At The Level Of The Patellar Tendon In Full Flexion -To Present Special Modularity, Usual Dimensions Of The Tibia To Be Compatible With At Least 3 Dimensions Of The Femur -Method Of Implantation: Removable Insert With Peripheral Attachment System Of The Insert, With Mechanical Stabilization Elements At The Level Of The Tibial Piece (Wedge Type) ) -Multiple Dimensions: Min. 10 Insert Heights With 1Mm Increments -Variant With Posterostabilization -Remaining Term Of Sterilization No Less Than 3 Years At The Time Of Delivery Unit Of Measure: Piece; Quantity: 100.00. 1.4 – Set Of Tools Free Of Charge The Set Of Tools Offered For Use Free Of Charge According To The Loan Contract, Will Meet The Following Requirements: 1. Compatible With The Endoprostheses Delivered 2. Will Be Offered During The Period From The First Delivery Of The Prostheses Until The Implantation Of The Last Existing Prosthesis In The Beneficiarys Stock