Tenders Are Invited For Thermal Modernization Of A Multi-Family Residential Building Including The Replacement Of Windows And Doors And The Installation Of A Photovoltaic Installation In A Building Owned By (...) At Ul. Stolarska 33A

1) Thermal Modernization Of The Building, In Accordance With The Audit And Construction Design Attached To The Swz, Including In Particular: - Thermal Modernization Of The Walls Filling The Residential Building With Styrofoam And Wool Of Thickness. 7 And 14 Cm Depending On The Wall In Accordance With The Audit And Construction Design, - Thermal Modernization Of The Walls Of The Plinth Of A Residential Building With Styrofoam Thickness. 14 Cm, - Carrying Out A Major Renovation Of The Balcony Slabs In Accordance With The Construction Design - Thermal Modernization Of The Jambs With Styrofoam - Performing The Necessary Sheet Metal Work Resulting From The Thickening Of The Walls, - Dismantling The Canopies Over The Balconies Of The Top Floor, - Installing The Canopies After The Thermal Modernization Of The Walls, - Works Related To Moving The Intercom Cassettes To The Finished Façade Of The Vestibule, - Facade Cladding With Tiles On The Plinth And The Front Wall Of The Vestibule, - Making The Necessary Roofs Made Of Coated Sheet Metal On All Elements Located Directly Next To The Walls Of The Vestibules, - Making A Band Of Paving Stones On A Sand And Cement Ballast Around The Building With A 2% Slope From The Building, 50 Cm Wide + Edging, - Elevating The Gutters And Downpipes On The Vestibules Forward, Including Their Replacement, With Prior Preparation Of The Substructure Before The Works Thermal Modernization Of Vestibules, - Painting All Steel Elements On The Facade And Balconies With Chlorinated Rubber Paints, 2) Thermal Modernization Of The Ceiling Above The Top Floor And On The Roof; 3) Installation Of A Photovoltaic Installation, Including In Particular: - Construction Of A 6.5 Kwp Photovoltaic Installation, Along With A 10 Kwp Energy Storage Facility In Accordance With The Audit And Construction Design, 4) Replacement Of Lighting Fixtures On Energy-Saving In Common Areas;5) Replacement Of Pvc Windows And Aluminum Entrance Doors To The Building;6) Thermal Modernization Works In The Basement Of The Building;7) Thermal Modernization Works In The Vestibule;8) In Addition, The Scope Of Work Includes: - Disposal Of Waste Generated After The Works, - All Fees And Arrangements Resulting From The Work (Including Fees For Used Utilities, Fees For Waste Disposal, Occupation Of The Road, Etc.) Are On The Contractors Side, - The Contractor Is Obliged To Install An Electrical Switchboard With A Measuring Point And A Water Intake With A Water Intake And Measuring Point In The Place Indicated By The Ordering Party And At His Own Expense, - The Contractor Is Obliged To Sweep And Clean The Common Areas, I.E. Staircases, Vestibules And Corridors In The Basement, At The End Of Each Working Day. If The Contractor Does Not Perform These Activities Or Performs Them Negligently, The Ordering Party May Commission These Works To An External Company And Charge All Costs Related To This Service To The Contractor. - The Contractor Is Obliged To Wet Wash The Common Parts,