Request For Quotation Purchase Of Household Supplies

Fum Tape No Less Than 1.5X19.5. Width Not Less Than 15Mm, To Connect And Assemble An Aluminum Heating Radiator, An Installation Kit Is Required. The Standard Set Includes Adapters With Threads (Fittings) To 1/2 Or 3/4, A Plug, A Mayevsky Valve (Air Vent) With A Key, As Well As Mounting Brackets For Fixing The Battery To The Wall. Installation Kit (Set): Contains Passage Fittings (Right And Left), A Plug And An Air Vent. Mayevsky Valve: Needed For Manual Release Of Air From The System. Brackets: Hold The Radiator On The Wall (Usually 2-3 Pieces). Intersectional Nipples And Gaskets: Used If You Need To Add Or Remove Sections. Shut-Off Valves: Ball Valves Or Thermostats For Shutting Off The Water. Contents Of The Installation Kit Du-15: Adapter 1 X 1\2 - At Least 2 Pcs With Left-Hand Thread And At Least 2 Pcs With Right-Hand Thread. Plug 1\2 - No Less Than 1 Pc. Manual Air Vent (Maevsky Tap) 1\2 - No Less Than 1 Pc. Key For Manual Air Vent - At Least 1 Pc. Gasket - At Least 4 Pcs. Flat Anchor Bracket K.6.3 With Dowel - At Least 2 Pcs. Warranty For At Least 12 Months, Welding Electrodes With A Diameter Of At Least 2 Mm Are Used For Welding Thin Metal. Manufactured According To Gost 9466-75 Standards., Flexible Hose, Length 1.0 M, Double-Sided Internal Thread, D 15 (Nut, Fitting), For The Work Of The Surgical Department Drill Bit For Concrete, Length No Less Than 10 Cm, Diameter No Less Than 8 Mm, Welding Electrodes With A Diameter Of At Least 3 Mm Are Used For Welding Thin Metal. Manufactured According To Gost 9466-75 Standards., For The Work Of The Surgical Department Drill Bit For Concrete, Length No Less Than 10 Cm, Diameter No Less Than 6 Mm, An Aluminum Heating Radiator With A Plug Is A Sectional Battery Made Of Light Metal, Equipped With End Caps (Plugs) And A Mayevsky Valve For Air Release. This Plug Closes The Unused Side Holes Of The Manifold, And Also Makes It Easy To Remove Air Pockets That Interfere With Normal Heating. At Least 10 Sections. Heat Transfer Of One Section: From 150 To 200 W. Operating Pressure: 6–16 Atmospheres (Depending On The Model And Manufacturing Method). Center-To-Center Distance: Usually 350 Or 500 Mm. Maximum Water Temperature: Up To +110 °C...+120 °C. Plug Material: Steel Or Brass With Thread (Often With Right And Left Rotation For Installation Foot). Dimensions Of One Section (Standard) Center Distance: 500 Mm. Total Height: No Less Than 560 Mm. Width: No Less Than 80 Mm. Depth (Thickness): No Less Than 80 Mm. Water Volume In The Section: No Less Than 0.3 L. Section Weight: No Less Than 1.0 Kg., Cordless Drill-Driver 48 V 4.0 Ah Impact. Cartridge 13.2100 Rpm, No Less Than 160 Nm., Single Grip Type. Appointment For Shower. The Coating Is Chrome. Shut-Off Valve Ceramic Cartridge. Degree Of Gloss - Glossy. Mounting Method: Wall. Number Of Mounting Holes: 2. Type Of Eyeliner: Hard. Connecting Size 1/2. Spout Design Without Spout. Mixer Height, Not Less Than Mm116. Length Of The Mixer (Depth/Extension), Not Less Than Mm141. Width Of The Mixer, Not Less Than Mm215. Filter Switch No. Complete Set: Wall Holder, Watering Can. Colorchrome Body Material: Brass.